• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Help me with overclock plz.

Z

Zeke

Gawd
Joined
Apr 19, 2003
Messages
837
OK< I'm overclocking my P4 3.0C on my Asus P4C800-E Deluxe, it doesn't let me set dividers, so what I ahev to do is set the RAM to run at 320, and then it should overclock as I turn up the FSB, but for some reason, it will always pick up as 320 MHz when I'm booting up after an overclock, how's it possible that it could just be locked like that? When I set it on auto mode, it sets itself to frickin 266, so what do I do? Could i tbe possible that it's overclocking but just not picking up on the RAM speed during boot? Cause when I lock it at DDR400 and then overclock, it wont boot, pressumably because the RAM is being overclocked cause it will boot at said FSB with the RAM speed locked at 320 or lower... Is there any bios revision I can flash that will change this if that's the issue? thanks in advance :D
 
You must log in or register to reply here.
Back
Top