Fried Motherboard Question

Brutus

n00b
Joined
Aug 9, 2009
Messages
3
Hi all. I was wondering if someone could give me a hand in figuring out if I can salvage my 2 and a half year old computer before I toss it for good. I don't know too much about the ins and outs of computers but I can make my way through if someone would be kind enough to help me.

My desktop motherboard is fried and I'm wondering if there is anyway to replace it. It was an ASUS motherboard. The video card has been taken out because my brother needed it for some online gaming that he was doing. He said it would work better with whatever computer he's running right now so I let him have it. he gave me an ASUS vid card in return. its brand new, hasn't been installed yet.

To sum it up, I was wondering if there is any cost effective way to get this thing at least running again? If its going to cost hundreds I'm not going to bother. I don't mind losing any info that is currently on the hard drive. I just want all the drives and devices to work.

I apologize to teh staff here at hardforum if this has been put in the incorrect section or if I've completely overlooked a portion of the forum dedicated to this type of question.

Any help on this would be greatly appreciated.
 
whats the processor that was in the board that fried? is this video card agp or pci express? give us the model number of the asus board that fried. did you take the processor out of the board that fried? if so list here what it is.........will say on top of the processor. need a budget also you trying to stay under 100.00 bucks or what is your budget exactly to replace the board?.
 
if the mobo is all that you want to replace, then make sure that the replacement mobo supports:
- the CPU currently installed
- the Asus video card he gave you, i.e. is a newer PCI-E versus an older AGP card
- the memory you have installed, i.e. DDR or DDR2
- the heatsink
- the current power supply, i.e. 20 vs 24 pin connector, etc

if you list your current specs it may make it easier to figure out what may work.
 
whats the processor that was in the board that fried? is this video card agp or pci express? give us the model number of the asus board that fried. did you take the processor out of the board that fried? if so list here what it is.........will say on top of the processor. need a budget also you trying to stay under 100.00 bucks or what is your budget exactly to replace the board?.

AMD64 Athlon X2. I don't know what you mean by the vid card question. its an ASUS 08G17016210. I"m going to have to apologize for saying that it is an ASUS motherboard. The fan on the board has ASUS on it but i'm not sure if the mobo itself is an ASUS. the only thing that may even resemble a model number on the motherboard is on the backside of it and it has an HP Pin number on the label that reads: 5188-5622. the other number on the tag is M9B1KT. I don't even know where the processor is if I wanted to take it out.

As for the budget, I'd love to stay under 100 bucks if possible. that woudl be best case scenario for me at the moment. I apologize to you guys for the lack of knowledge on my part. I don't know that I was prepared for this but I'm trying. Thanks for responding.
 
Maybe if you take some pictures of the innards of your computer and post them here, someone may recognize the mobo/etc. For a computer like you are describing it should be reasonable to find a replacement mobo, it is just a matter of finding the right one.

If this was a prebuilt computer that you bought you may even be able to find a model number on the case like "HP Pavilion a706n" or whatever. We could then go look up that computer and find what model mobo you need. Like c1001 said a detailed list of specs for what is in your computer would be helpful. Also, if all you are doing is replacing the motherboard you won't lose your data, that is all on the hard drive.

EDIT: Oh yeah, it would be good to know if your graphics card is a PCI-E card, AGP card, etc? Also, if you end up deciding to scrap the computer please DO NOT just throw it in the dumpster. There are always local services that can take your unwanted older computers and refurbish them for schools and the needy.
 
Last edited:
if its an hp or compaq.......all we need is model number which will say on the front of the machine most likely and we can look it up. im sure we could find a motherboard in the hundred dollar range. if you look where the vid card goes in .....you might see pci e express on the slot.......or you could see agp 4x. if its an athlon x2 could be socket 939 or am2.
 
Product Specifications

Content starts here


Hardware
Software
Warranty
Product number
RJ181AA
Introduction date
04-Aug-2006
Country/region sold in:

*
US
*
Canada

Hardware
Base processor
Athlon 64 X2 (W) 3800+ 2.0 GHz

*
2000 MT/s (mega transfers/second)
*
Socket AM2

Chipset
GeForce 6150 LE
Motherboard

*
Manufacturer: Asus
*
Motherboard Name: A8M2N-LA
*
HP/Compaq motherboard name: NodusM3-GL8E

Memory
Component Attributes
Memory Installed 1 GB
Maximum allowed 4 GB* (4 x 1 GB)

*Actual available memory may be less
Speed supported PC2-4200 MB/sec
Type 240 pin, DDR2 SDRAM
Hard drive

*
200 GB SATA
*
7200 rpm

16X DVD(+/-)R/RW RAM (+/-)R DL LightScribe drive

* Must use Double-Layer media discs in order to take advantage of the DL technology
* Must use LightScribe-enabled media discs and supporting software in order to take advantage of the LightScribe technology

Function Maximum speed
DVD-RAM Up to 5X
DVD-R DL Write Once Up to 4X
DVD+R DL Write Once Up to 8X
DVD+R Write Once Up to 16X
DVD+RW Rewritable Up to 8X
DVD-R Write Once Up to 16X
DVD-RW Rewritable Up to 6X
DVD ROM Read Up to 16X
CD-R Write Once Up to 40X
CD-RW Rewritable Up to 32X
CD-ROM Read Up to 40X
Modem
56K bps data/fax modem
Video Graphics
Integrated graphics
Sound/Audio
Integrated High Definition audio

* Realtek ALC 888 chipset
* Supports up to 8 audio channels
* Dolby Pro Logic II compatible

Network (LAN)
Integrated 10/100 Base-T networking interface
Memory card reader

* USB interface

* Supports the following cards:
o Compact Flash I
o Compact Flash II
o SmartMedia
o Memory Stick
o Memory Stick Pro
o MultiMediaCard
o Secure Digital (SD)
o Micro Drive
o XD Picture Card (xd = extreme digital)

External I/O ports
I/O ports on the front panel
Port type Quantity
9-in-1 (4 slot) + 1 USB One
1394 One
USB Two
Headphone One
Line-in One
Microphone One
I/O ports on the back panel
Port type Quantity
PS/2 (keyboard, mouse) Two
VGA One
USB Four
1394 One
LAN One
SPDIF out (coaxial) One
Audio (side speaker out, rear speaker out, center speaker out, line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity
PCI Three (Two available)
PCI Express x16 One (One available)
Drive bays
Bay type Quantity
5.25" external Two (One available)
3.5" external Two (One available)
3.5" internal One (None available)
 
Last edited:
if you can't find the model number on the video card (check the back), post a photo of it so we can tell you if it will work with a PCI-E motherboard,
 
Or you could get a new m/b + case quite cheap if a "replacement" costs too much or a normal atx board doesnt fit in the case.

Edit: Oh and how do you know the motherboard is fried?
 
Or you could get a new m/b + case quite cheap if a "replacement" costs too much or a normal atx board doesnt fit in the case.

Edit: Oh and how do you know the motherboard is fried?

this is very true, I just bought a "dead" MSI P35 Platinum that booted up fine for me, the seller didn't have any different memory to try with it so I stuck in some old low voltage DDR2 667MHz RAM and it works (have yet to test it with PC2 6400), so yeah, it could very well be another problem...

also, check out what video card you gave your brother and the one he gave you in trade, he may have pulled a fast one on you, especially if he's gaming with it like you said...

brothers, can't live with 'em, can't beat 'em over the head with a keyboard, well, at least while momma's looking...

;)
 
Back
Top