Flashed Wrong BIOS, Can only 1/2 Boot

fat-tony

[H]ard|Gawd
Joined
Apr 15, 2003
Messages
1,205
Seems my roommate ordered a K7N2-Delta L, but got a straight K7N2. We flashed the K7N2-DL bios onto it, and now it will 1/2 boot. We can get into the BIOS, but if we just let it go, it won't show the screen with all the hardware listed on it.

Any suggestions, or is it time to start the RMA process? To be fair, the company that sold him the board lied about what board it actually was.
 
It doesn't get far enough to allow a floppy, cdrom, or hard drive boot. It just... hangs. The bios doesn't have a built in flashing utility. If it were simple like that, I wouldn't have posted this thread :D.

Edit: The D-Bracket LEDs say that its hanging on "initializing floppy controller". We disabled the floppy controller in the bios, but it still hangs on that. Also, there is no floppy drive plugged in at all.
 
lithium726 said:
well, try to plug a floppy drive in? maybe that will make it happy

I... don't think we have one...

The motherboard has been aired to MSI now anyways, so we can't test that. We'll see what model comes back, if it's the Delta L that it was supposed to be in the first place, or something else entirely.
 
If it wont let you reflash then your only option is to replace the board or the bios chip through the manufacturer. Unless you know someone with the hardware necessary to flash the chip itself
 
fat-tony said:
I... don't think we have one...

hahahahaah sorry.. got a kick out of that, the only reason i have one is bc of my sata hdd that windows install doesnt recognize :rolleyes:
 
Back
Top