First AMD G34 Board Shots

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
For those of you interested, Charlie Demerjian has posted a couple AMD G34 motherboard spy pics on his new website SemiAccurate. I snagged this picture for those of you too lazy to click the link, everyone else head on over and check out the other motherboard shots.
 
Very interesting.
That appears to be dual Broadcom 10GbaseTX (the large chips to the left of the PCIe) on it. Which begs the question; where's the GigE controller for the third port?
 
Followup:
Those appear to be dual BCM57710's. Product info is here: http://www.broadcom.com/products/Small-Medium-Business/Gigabit-Ethernet-Controllers/BCM57710
Each chip is a dual 10Gbase MAC+XAUI - but I can't see the 25MHz PLL from the photo to confirm it. They're absolute beasts with TOE, iSCSI TOE + Initiator, and full RNIC. They connect via PCIe at an 8 lane required width.
Thusly, if we extrapolate PCIe lanes based on slots being full width, and SATA being a SiIm part, this board is packing over 60 PCIe lanes. Even if we presume that the second BCM57710 is at half width for single port, that's 56 PCIe lanes!
 
Very interesting.
That appears to be dual Broadcom 10GbaseTX (the large chips to the left of the PCIe) on it. Which begs the question; where's the GigE controller for the third port?

The third one might be an IPMI port.


10GBE on board :eek: Who do I make the check out to? :D
 
This is a totally shallow comment, but why do a lot of AMD boards look like total ass?
 
It's a workstation board.. all workstation boards (Excludin the P6T6 WS) really look mediocre... this one actually isn't too bad :p
 
The third one might be an IPMI port.

No, it's likely a third 10GbE port. There's no reason they would use two BCM57710's otherwise. The other possibility is that they're not 10GbCX4's (I always screw that up, CX4 is copper,) but rather a dual MAC+PHY and a MAC+PHY for triple GigE. However, I don't know of any current Broadcom GigE parts that require a DIHS. Only the 10Gb parts.
The other possibility is that it's one 57710 and a fancied-up sample of a GigE MAC+PHY. They're definitely big offload parts regardless.

10GBE on board :eek: Who do I make the check out to? :D

That's "RS" spelled out phonetically. :)

Seriously though, I will probably be getting back into the game and offering the production version as a storage platform using lane-splitters. Who wants a single system with 144 disks? You do, you do! I hope.
 
It's a workstation board.. all workstation boards (Excludin the P6T6 WS) really look mediocre... this one actually isn't too bad :p

You, sir, are wrong.
Please note the integrated DB15 and serial port above it. Please also note the standard PS/2 connectors located to the right of the USB ports. Please also note that it is 2 or 3 Ethernet connections. The reason for the PCIe16x slots is because of 4/8Gbit FC cards shifting to PCIe4x and RAID shifting to PCIe8x. You will note the presence of both a 4x and an 8x slot, and additionally a PCI slot located above what may be the IPMI piggyback connection.
There are also no 3 pin fan headers - instead, there are 2 PWM (4 pin) headers located directly above the Broadcom silicon. Very far away from the CPUs. Also note how the RAM location blocks any long graphics cards from the PCIe16x slot.

This is a server board.
 
It's not an enthusiast gaming motherboard... is what I meant -_-

Didn't need a paragraph to say "I think this is actually considered a server motherboard, not "workstation""
 
The 1st pci-e slot looks like there's a problem as won't long video cards like the gtx295 not work there with those ram slots in the way?
 
If only AMD had something faster then a Slopteron to put in those sockets. :(
 
Isn't this still a quite long time away? And was this socket supposed to be for Opterons/server platform only? AM3 is pretty fresh still.
 
The 1st pci-e slot looks like there's a problem as won't long video cards like the gtx295 not work there with those ram slots in the way?
Server boards are not designed for use with that kind of stuff.
In a server board the slots are for RAID controllers, Fiber Channel HBA's, etc.
 
how home much does a 10Gigabit switch cost???

Cheapest would be an HP ProCurve 5406zl solution.
About $5,000 base chassis, then $3,700 for a two port 10Gbase module, $375 for each CX4 transceiver, then $100+ for each CX4 cable.
So about $33,200 for 12 10Gbase-CX4 ports.
 
Cheapest would be an HP ProCurve 5406zl solution.
About $5,000 base chassis, then $3,700 for a two port 10Gbase module, $375 for each CX4 transceiver, then $100+ for each CX4 cable.
So about $33,200 for 12 10Gbase-CX4 ports.

Yeah for a full blown 10GBE switch it's an arm and a leg. You would be better off getting something like a full gig switch with a 10GBE port or two and then connecting your server from that point.
 
Yeah for a full blown 10GBE switch it's an arm and a leg. You would be better off getting something like a full gig switch with a 10GBE port or two and then connecting your server from that point.

Uh, Ockie?
That's a modular switch. So you could swap out for a bunch of GigE ports - you just still end up around $20,000 or so. :)
 
with the speeds of hard drives now a days... anyone with a home network could benefit with a 10gig switch... i know they are milking us, but come on!!!
 
Back
Top