• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Fan Directiions?

captain204mike

Weaksauce
Joined
Nov 20, 2006
Messages
125
i have 2-80mm fans in front of case
1-80mm fan in top of case
and 1-120mm fan in back of case

which way should i put these fans to get best air,,blowing in or out?
 
i would say to have the 2 front 80mm fans as intake
and the back 120mm as exhaust
dont know about the one on top though
 
nicolas9510 said:
i would say to have the 2 front 80mm fans as intake
and the back 120mm as exhaust
dont know about the one on top though
I'd have the top one blowing out. Might as well give convection a little help.
 
He has only 1 back fan.

120mm intake
1x80mm top exhaust - Cycle air past the CPU fast.

2x80mm exhaust - Create a negative pressure zone within the case, I think this will help draw more air through the intake fan in the back.

- Trade off is more air = more dust. Personally I use positive pressure to limit dust in my case. It works.
 
Ok here is a question on the subject. would a 120 mm fan be better as an intake or exhaust if its going to be positioned next to a zalman heatsink/fan.
 
Back
Top