• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

External PSU

S

sdk

[H]ard|Gawd
Joined
Dec 2, 2003
Messages
1,597
I saw this thing once and you pluged it into your standard wall outlet and it came and turned it into 3-4 molex's.
I need it for a external ccfl project.

So if you know a site that has it and, or even know the name of it, and has cheap ccfls and ships to Canada, I will give u a big cookie.
 
I'm pretty sure your CCFL's want to run to an inverter to go to 12V power, right? (These are PC or automobile CCFL's I assume..) So, just get a wall-wart from a local electronics shop thats 12V output, maybe an amp or two max, and wire up the + and - of the output to 3 or 4 molex's if you need to disconnect, or wire directly to the inverters if you don't need to unplug 'em. If you pick up a 12V switch of some type, and some extra wire, you could lengthen the leads and have an on/off power source. Should be like $5.00 tops for this project. Definately cheaper than a dedicated PSU, and not hard at all to accomplish.
 
Well this was like 12 bucks.
It was liike a power bar but molex's came out of it.
 
You must log in or register to reply here.
Back
Top