Ever snapped a mobo before?

Joined
Jul 31, 2005
Messages
997
Has anyone here ever snapped a mobo when installing something like a PCI card or a HSF? I get nervous whenever I have to push a PCI card hard in order to secure it in the socket or when I have to install a HSF on the CPU.
 
I'm sure someone somewhere has... but just take your time and don't apply too much pressure. I've built countless systems, and installed countless HSFs and expansion cards... I've yet to snap a board (knocks on wood).
 
yeah, I've never snapped one either, though I admit I always FEEL like I'm gonna snap the damn thing when I install the HSF. Especially on those old leaf spring ones that you had to use a flathead to snap in place. You'd think they'd have designed the ATX form factor to have some sort of support directly under the chip area to guard against that possibility.
 
yeah, I've never snapped one either, though I admit I always FEEL like I'm gonna snap the damn thing when I install the HSF. Especially on those old leaf spring ones that you had to use a flathead to snap in place. You'd think they'd have designed the ATX form factor to have some sort of support directly under the chip area to guard against that possibility.

Ugh I remember those.... Heatsinks for Athlon XP and T-Bird chips were notorious for that crap. What always scared me were the 478 P4 heatsinks. With the heatsink on, you can see the board being warped from the pressure.

Back to the origional topic, no I've never snapped a motherboard. The worst I've seen happen has been a cracked PCI slot or memory slot but the person was reckless in those cases.
 
I've only built two PC's so far but installed components countless times, and I've found that motherboards are pretty tough. Once while attempting to de-heatsink CPU with a flathead screwdriver, I slipped and the screwdriver slammed into the PCB, and skidded across it for about half an inch. Still works fine. Just down use excessive force, and everything should work. Remember heatsinks can take a lot of pressure to clamp on, but don't sweat it.
 
I did that once too Lonestar. I was sure I was out $150 but the thing ran just fine. Amazing, really.
 
yeah, I've never snapped one either, though I admit I always FEEL like I'm gonna snap the damn thing when I install the HSF. Especially on those old leaf spring ones that you had to use a flathead to snap in place. You'd think they'd have designed the ATX form factor to have some sort of support directly under the chip area to guard against that possibility.

I was always more worried about slipping the screwdriver and ramming it through the board.:eek: Thankfully that never happened.

Edit: Never cracked a mobo either.
 
Gotta love those old socket a retentions...

took out the middle nubs taking a hsf off once. had to track down one that used all 6 to keep using the board. still works fine though.
 
I think i broke a ram dimm slot ages ago because I wasnt paying attendting and pulled the slot up with the ram when i forgot to un snap the ram heh.
 
I snapped a mobo before.

But because it was half supported, the other half was overhanging, and a monitor fell off my desk.
 
Back
Top