• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

enough juice?

Vaulter98c

[H]ard|DCer of the Month - October 2009
2FA
Joined
May 21, 2008
Messages
5,840
610 watts, its a rosewill I think, served me fine with sig rig *quad rail with 20 amp per line if it matters , but
will it run sig rig with a pair of 260's in it or do I need to throw in my second PSU (back to dualies baby!) to run? old version, not the 216's
 
Last edited:
Is O.J. innocent??
hmm... with that PSU, i think that'll be pushing it
 
hmm, two PSU's it is then!

it will run 1 right? cause I'll just stick the second card and like the CD drive and a fan on the other supply

how many watts will each card pull?
 
I wouldnt chance it on a 610W Rosewill PSU. ;) Under full load Im betting that each one pulls about 200W. How many amps are on the 12V rail?
 
used to run a pair of 400 watters back in the 7 series days, nothing new

1kw, eh, too much cash when I already have a quick way out
maybe next year once prices come down some more and I can get a few more 260's for my farm-to-be server rack I just finished painting
 
actually, they are in, but it might behove me to use my new split case Ive been tinkering with
 
one PSU hooked to the mobo, the other one not. do you turn it on with a paper clip?
 
my bro made a plug WAYYYYY back in the day of the 6800 ultra, we won one at a LAN and only had like itty bitty PSU's ( I was rocking a socket A with a 7500 AIW at the time ) so we put two together!
 
Rosewill power supplies are some cheap stuff, I wouldn't trust it with even one 260. I have run a pair of original 260's with a Corsair vx550w (single 41 amp 12v rail) with no problems.
 
you can buy newer ones, like 10 bucks a pop, I lost the link cuz it was on my old browser, stand fast and I'll get it

(they are your 260's FWIW :) )
and Ive run my sig on it just fine, and another rig with 3 96's too
 
Here is a pic of it from another thread I talked in, nothing fancy but it works!
f9f6d41bd8.jpg


Here is the plug
Here is another one
 
i can build one of those !!
so is there a more detailed picture of schematic of that switch?
 
I'll try to remember it next week, but I go to ft knox for 5 days tomorrow, and I will get that's asap upon return. It's buried now, so I'd have to look for it
 
Two PSUs with two shitty PSUs still gives you shitty power delivery. Ditch the Rosewill and the other one if it's low-quality and buy yourself a new good-quality unit. It'll pay off in the long run.
 
Two PSUs with two shitty PSUs still gives you shitty power delivery. Ditch the Rosewill and the other one if it's low-quality and buy yourself a new good-quality unit. It'll pay off in the long run.

Take Zero82z's advice, when cheap power supplies go out, they often go out big and take a few of your components with them. I've got a dead hard drive, motherboard, and processor sitting in front of me that was killed by a junk power supply going out (not mine but just fixed for someone else). Your better off investing in a good quality power supply.
 
Back
Top