• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Cooling capacity?

Joined
Aug 3, 2004
Messages
651
what kind of cooling capacity am i looking at with the following:

AC Cuplex XT on an FX60
2x Koolance blocks on dual 512 gtx's - HERE
with a BIP X-flow 120.3
Ehiem 1048

6mm/8mm tubing...
 
nytrackstar said:
what kind of cooling capacity am i looking at with the following:

AC Cuplex XT on an FX60
2x Koolance blocks on dual 512 gtx's - HERE
with a BIP X-flow 120.3
Ehiem 1048

6mm/8mm tubing...

Define cooling capacity?
 
am i going to be seeing some decent temps? alot better than high-end air?

...ive had a the apex ultra kit on an optie 170 and 2x 256mb gtx's and had 38's on the gfx cards and 35 on the cpu

will the small bore/lo-flow system compete?
 
Thats a pretty restrictive set up u have there /

But with those small lines it well look sweet .

with that pump and roughly 450 watts of heat created with about 250 liters an hour .and a rise of 2.5 meters

Cpu temps full load about 50-55C
Gpu Temps full load about 54-60c

With this pump
http://www.frozencpu.com/ex-pmp-40.html

with 450 watts of heat and roughly 750liters an hour and a rise of 6meters

Cpu temps 39-42C
Gpu temps 41-46C
I didn't use the equations because tube length and other variables are unknown this should be very close to correct.

Since the pump I linked to was a 36month warranty don't worry about the added{stress} of the smaller lines.
 
Back
Top