After installing my Tuniq Tower with electrical tape, I powered on my computer. It started, showed the two lights on the front of my P180 case, but no screen/picture came. Nothing from the BIOS, or any of that. I reseated the heatsink, removed and reseated the CMOS battery, removed and reseated the motherboard, and fiddled around with the power pins a bit. Whats up with the system? I remember when it worked before, whenever I opened the case to work inside of it and removed a component, the computer would power on, and then shut down very quickly, then power on and it would work. Now, all it does is power on. All fans and everything are blowing air, the CD-Drives eject, and I can hear the HDD working at startup.
Any ideas?
System:
Antec P180 Case
Gigabyte P965-DS3 rev 1.33 motherboard
2GB DDR2 800 Crucial Ballistix RAM
BFG 7950GT OCE 256MB Video Card
2 DVD Burners
160 GB Western Digital Caviar HDD
Intel E4300 @ 3.2GHZ (1.8 probably after I cleared the CMOS by removing the battery)
It was working well when I had the stock heatsink on, and now it wont work with the stock heatsink on, with the tuniq on, or with no heatsink on.
All help is greatly appreciated.
Any ideas?
System:
Antec P180 Case
Gigabyte P965-DS3 rev 1.33 motherboard
2GB DDR2 800 Crucial Ballistix RAM
BFG 7950GT OCE 256MB Video Card
2 DVD Burners
160 GB Western Digital Caviar HDD
Intel E4300 @ 3.2GHZ (1.8 probably after I cleared the CMOS by removing the battery)
It was working well when I had the stock heatsink on, and now it wont work with the stock heatsink on, with the tuniq on, or with no heatsink on.
All help is greatly appreciated.