Computer acting up after messing with BIOS

Boozer

2[H]4U
Joined
Mar 11, 2004
Messages
2,348
today i was messin around experimenting with my computer. and i came upon this setting to change the comps performance to "turbo". i read up in the motherboard booklet and it just said basically that the system might be unstable and that i can have some lag time. i checked it, restarted my computer. my computer wouldnt bootup, so i turned i restarted it again but got into BIOS and i changed my settings back to the way they originally were. but my computer still has some bad lag/hang time. does anybody know how to fix this??

My mobo is a P4C800-E Deluxe. thanks for yer help
 
set your computer settings in bios to fail safe defaults and manual set the 15X200
shut down
reset the cmos by shorting it (see manual)

start again from scratch
 
Boozer said:
wow thanks but i have no idea what you just said lol

Your motherboad manual should give you a hand in this department. Its probably close by, and probably much faster to access.
 
im looking at the manual and it doesnt have any troubleshooting tips er anything. it says it has C.P.R. thats supposed to recover the BIOS if anything is wrong due to overclocking. but its not doing anything.... oh wait im looking through every page here and it says something about jumpers, "Clear RTC RAM: This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, is powered by the onboard button cell battery". is that what your talkin about? im not sure on how to set my bios settings to fail safe defauls and manual set the 15X200. does that mean just reset the bios then reset the cmos by doing what it says in the manual?

thanks guys, sorry i guess im more of a comp noob then i thought. thanks a whole lot
 
Legitreviews had a how to on one of their mem reviews on their way to bring back post from hard O/C fails. I'll go look for it.

You might need to turn off machine - short the cmos jumper (put jumper on both pins) - take out the battery and unplug the AC line (not by PS rocker switch - the PSU has a drip voltage). Then leave for 1 hr. Plug back in, reinsert battery, reset cmos jumper to unshorted (one pin contact). Then try this while booting first time:
.......press & hold the INSERT key on your keyboard while pressing the power on button, it should boot right up at default volts & fsb.

Sometimes it works sometime no but you should try that first.
If that doesnt make it happen, then do it again and manually set memory timings to highest numbers avail in ea category 3-4-4-8 before booting into O/S.

Edit: you short the cmos with computer off, right?
 
Two added things - I remember the article now - when doing the above be sure to up voltage for DIMMs to 2.75V min
Clearly your RAM is not compatible with mobo/turbo/bios settings
Secondly - disable fast booting option in bios to give RAM more time to get juice.

Legitreviews did what I said but pulled test mem first and put in crap RAM at defaults, booted into Windows, then shut down reinstalled testing high perf mem.
The trick is to boot somehow to reset the system.

http://www.techsupportforum.com/computer/topic/14532-1.html
(disable quick boot in bios helps)

http://www.techsupportforum.com/computer/topic/9770-1.html

http://www.abxzone.com/forums/showthread.php?t=59206&page=5
(Up voltage)

Edit: You might want to register and jump into that ABXzone thread. They have a lot of very patient people there who will guide you step by step.

Not to say the people here wont help, but they are a little further along the learning curve.
 
okay i wil put my dimm voltage to 2.75v. along with the disableing of fast boot. i did what u told me with the jumper and cmos reset. it didnt do anything, i will go to the abxzone thread. thanks alot
 
Back
Top