![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
I have two MSI HD 6970 Lightning cards in CF. I have three monitors and a TV connected. My main display is a 24" 2407WFP 1920x1200. To the right I have a Dell U2311H in 1080x1920 portrait mode. To the left I have a Dell 2211h in 1920x1080 and across the room I have a 58" Plasma in 1920x1080 using HDMI.
Here is the issue. When using all the displays the main card idles at 500MHz/1375Mhz. The other card with no monitors connected idles at 250MHz/150MHz. The main card idles in the 49-51C range and the other card idles in the 35-37C range. If I go into CCC and manually disable all of my displays expect the 24" 2407WFP the main card will also idle at 250MHz/150MHz and idle in the 37-39C range. Also with all displays enabled my card draws about 60W more power when compared to a single display in use.
What I would like to do is configure hotkeys to enable all monitors and disable all monitors except the 2407WFP. So for example CTRL+ALT+1 is only the 2407WFP and CTRL+ALT+2 will enable all displays. A third option would be nice too CTRL+ALT+3 being all monitors but not the 58" TV.
This way I can conserve power and run a single monitor when I'm away from my PC. When I want to enable the monitors I can easily do so instead of taking the time to do it manually.
I'm not sure if this is possible but I figured if it was someone here would be able to help. I'm not certain if running a single display in portrait and all others in landscape makes it more difficult or not.
So there you have it, please help.
Here is the issue. When using all the displays the main card idles at 500MHz/1375Mhz. The other card with no monitors connected idles at 250MHz/150MHz. The main card idles in the 49-51C range and the other card idles in the 35-37C range. If I go into CCC and manually disable all of my displays expect the 24" 2407WFP the main card will also idle at 250MHz/150MHz and idle in the 37-39C range. Also with all displays enabled my card draws about 60W more power when compared to a single display in use.
What I would like to do is configure hotkeys to enable all monitors and disable all monitors except the 2407WFP. So for example CTRL+ALT+1 is only the 2407WFP and CTRL+ALT+2 will enable all displays. A third option would be nice too CTRL+ALT+3 being all monitors but not the 58" TV.
This way I can conserve power and run a single monitor when I'm away from my PC. When I want to enable the monitors I can easily do so instead of taking the time to do it manually.
I'm not sure if this is possible but I figured if it was someone here would be able to help. I'm not certain if running a single display in portrait and all others in landscape makes it more difficult or not.
So there you have it, please help.