• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Case Edge Wrap?

C

Carlosinfl

Loves the juice
Joined
Sep 25, 2002
Messages
6,633
I just drilled in some small 60mm holes through my motherboard tray so I can run some wires through however I would like to find some edge protection so my wires don't strip as they get pulled against the ruff edge of the hole.

Can someone please point me to what I am looking for and or an online vendor?
 
Agreed, for a 60mm hole you will get a better look with grommets. Now for something like a 120mm or a case window head down to your local Autozone (or whatever car part store you have) and buy some door edge molding, 4 feet or so will cost you about 2 dollars, while buying at a "modding" merchant may cost you 2 bucks for a foot or less.
 
You can also grab a rubber or silicone hose, take a letter opener, slice it down the middle (to make it like split wire loom) and fit it around the edges as well. Obviously you only want a small diameter hose as well.
 
You can find gromments at a Autoparts store, there used to put wires thru the firewall, not sure what sizes they have but it would be a good place to look.
 
I am surprised. I thought there was a stripping that is ridged on the outer end that is flexible that slides / attaches on to the case edge. I don't know what it was called but I recall my old Lian Li came with it on the top section near the power supply. It's usually white or clear but I am sure there are variants of colors available. Not sure what that is called.

My auto parts store had grommets but none where flexible rubber material.
 
I found this however their size chart must be converted so I will need to make 100% sure about the size of my hole diameter.
 
You must log in or register to reply here.
Back
Top