• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Case Advice

S

Siriso

Limp Gawd
2FA
Joined
Dec 23, 2009
Messages
215
I picked up some water cooling gear from another forum user to use in my next build.
I've considered different ways to mod my Antec 900 to make this work and I can't come up with anything that I really like. The best I could come up with is to mount one of the rads in the front but I would sacrifice too much drive space. I don't want to mount it externally since I will, on occasion, be toting this rig to lans.
Here's what has to go in the case:
i7+full size board
Starting with 1x 480, might go with 2, but that's a ways off IF I do.
1x 2.5" SSD
1x 3.5" HD
1x 5.25" Optical
I also want to snag a good fan control/temp monitor to put in a 5.25 bay.
Stuff that will be in the water loop:
CPU, GPU, MB (as soon as I pick a board and find a custom block for it), 2x120 rad, 1x120 rad, pump/res. If I find an appropriate case I might change the radiator setup.

This is my first water cooled rig and the only case I've really seen doing the rounds is the 800D and that's a lot bigger than I want. I love the design of it though...no so much the price.
Any suggestions?
 
You must log in or register to reply here.
Back
Top