• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

built a new res:)

J

johnzm

Limp Gawd
Joined
Jan 13, 2003
Messages
284
first time resivor builder so its was learning experience for me

i posted a few weeks ago of a plexi res cracking badly on me

this is what ive replaced it with


http://we-todd-did-racing.com/wetoddimage.wtdr?i=wMjg1OTM2NnM0MTNkZmQzMXk1NDE%3D

its all copper except the cap, so i believe itll prevent alot of the corrosion i was getting on the old resior(it had al. caps and fittins)

:cool:
 
big honkin' copper res. nice work.
that should take care of a lot of corrosion probs if your previous setup had some straight AL in it. You definitely shouldn't have to worry about it cracking. :D

I have a copper res that I have been playing with a little -- no newer pics than this one but this is how it started:
weapresrszd.jpg


the top and bottom are brazed in place and I built an adapter plate so it could be mounted to either an 80 or 120mm fan mounting location.
 
whow nice.

That really can be finnished off nicely with commandand or any quality polishing compiund :cool:
 
You must log in or register to reply here.
Back
Top