BSOD Windows XP on NF7-s

fizzy_bug

n00b
Joined
Jul 19, 2004
Messages
20
afternoon all

recently aquired through the magic of eBay an Abit NF7-s Rev2 for £55 inc shipping. 3mths old.
good price-performance match I thought since I have an XP2500-M which wasn't going anywhere fast on my Asus A7V333.
Thought I could simply swap the boards over and boot Window :eek: uh-arr :eek: blue screened on boot while that blue progress bar moves.

its a memory error (not to hand)
it's PC2700
processor running 11 x 166
FX5900 clocked to FX5950 (unrelated)
do not have the bios to hand.

please help !


DDR320?
Thats right, i've had to slow the ram down slightly.
looks like my PC2700 from Crucial is being pushed a little too much!!
windows now installs, thanks for your advice no doubt i'll be back to help other people!!
 
You just shocked the heck out of windows by switching from a VIA chipset to an nVidia one. It likely does not know how to communicate with any of your hardware, hense the BSOD.

You need to reinstall windows. Badly. If you have to back anything up before wiping your drive, you could try going into recovery mode - otherwise you'll need to reinstall your old mobo first.

Have fun.... :(
 
this is what I figured so...

I have a 60gb drive 1st partition 8gb fat32 2nd partition 50gb ntfs
formatted the 1st (using XP boot CD/instllation) after backing it up
its after it finishes copying setup files it blue screens 1/2 way thru blue progress bar

thanx for advice so far

:rolleyes: :D
 
Why are you using FAT32 for your boot partition? You'll find things are faster and much more secure if you use NTFS. There's no reason to use FAT anymore unless you need compatibility with an older Linux distro or something.

Dunno. That's my guess. Try NTFS.
 
:D update :D

You'll never guess what it was!
Setup could "not properly detect a mass storage device" connected to the computer. So I thought ah-ha! had plugged in the USB ASUS SD,MMC pannel without thinking.

installation of XP seems to be going well so far.....will report back if any further issues.

I use FAT32 as pri partition because I would frequently end up with no boot.ini on my A7V333 -using a floppy disk I could copy that missing file to the c:\

:D
 
spoke too soon

PAGE_FAULT_IN_NON_PAGED_AREA
FASTFAT.SYS
STOP 0X00000050
This was when "Prepairing Installation" was at approx 60% WinXP

Converted to NTFS
BAD_POOL_CALLER
STOP 0X0000000C2 (0X00000007, 0X00000CD4, 0X00000000, 0XE1005848)

Tried Win2003 out of nothing better to do
SETUPDD.SYS
STOP 0X0000008E (0X00000005, 0XF843B90D, 0XF899E9AC, 0X00000000)


other things I have not tried yet / observed.
Knoppix boots fine -detects onboard audio correctly.
the south bridge has x3 ramsinks stuck to it, even so runs very warm.
have not tried a full CMOS clear yet.
the north bridge has a big passive heatsink attached, does not heat up much atall.
havent tried the PATA -> SATA connector yet.
see the ebay auction here. The seller sounded reputable.
 
please post full system specs, so we can try to help you on this...

From the sound of it though, you're getting some kind of data corruption... How do u have your drive hooked up?
 
Back
Top