• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Barbs - Do they make a huge difference?

R

rsgunter

[H]ard|Gawd
Joined
Feb 24, 2007
Messages
1,325
I've been trying to find information on this for a bit now and I'm not getting much luck so I figured I'd post.
I don't have the same barbs throughout my setup, and I was thinking that it may be a good idea.

Who makes the best barbs and is there a standard for barbs? In other words, are they all compatible with one another being they are the same size? 1/4 bottom to 1/2 OD?
 
EK barbs are great.

The DD barbs are lacking in quality these days, but no barb is amazingly better than another one (of the same size).

All G 1/4 barbs fit G 1/4 slots... 1/4 refers to the threading on the barb, not the ID.
 
D-Tek barbs are the best in terms of quality. EK follows a close second.

DD barbs are horrendous and strangely enough even Swiftech barbs aren't manufactured all that well.

Barb's won't do much in terms of performance, but they'll give you the piece of mind that they won't warp from all the torque. They're also a helluva lot easier to remove tubing from.
 
So D-Tek and EK.

That's VERY odd to me that Swiftech wouldn't make good barbs.

Indeed this isn't for any type of performance boost, it's just a peace of mind thing. :)
 
hmm.... how about those DD Perfect Seal Fittings? The 3/8" version have the same ID as a standard 1/2" OD fitting... the only annoyance is that it requires a fair bit of effort to stretch tubing around it. The fitting is so tight I don't even need/use a hose clamp
 
zgundam said:
hmm.... how about those DD Perfect Seal Fittings? The 3/8" version have the same ID as a standard 1/2" OD fitting... the only annoyance is that it requires a fair bit of effort to stretch tubing around it. The fitting is so tight I don't even need/use a hose clamp
Click to expand...

I looked at those, but I really would rather use a higher flow fitting and clamps because I don't want to yank my stuff apart trying to remove a hose if I never need to.
 
zgundam said:
hmm.... how about those DD Perfect Seal Fittings? The 3/8" version have the same ID as a standard 1/2" OD fitting... the only annoyance is that it requires a fair bit of effort to stretch tubing around it. The fitting is so tight I don't even need/use a hose clamp
Click to expand...

Masterkleer tubing over a perfect seal barb is probably the most secure fitting you can find.

But, yeah... It sucks to remove the tubes, and it's even more annoying putting them on :p
 
You must log in or register to reply here.
Back
Top