Bad Mobo?

tfarre2

n00b
Joined
Jul 15, 2003
Messages
60
I built a new P4 system for someone with an IS7-E2. Most of the time you boot it up and it won't display anything. The monitor just keeps the orange light, but we know it's getting a signal. When you turn the case on it's side or sometimes (barely ever) if it's standing up we can get it into windows and it'll run for a few hours, but no more and it'll lock up or reboot itself. Well I thought I had it running fine so I shut it down and put the sides on. I booted it back up to let it run overnight to see if it's ok. I got the blank screen again. I decided to clear the CMOS and as soon as I moved the jumper to the clear setting the system turned itself on. That seems like some kind of a short somewhere in the mobo to me. Anyone have any thoughts?
 
I forgot to mention, the machine won't go off without that jumper on the 1+2 pins (normal setup). I hold power until it goes off and as soon as I release the button it boots right up again.
 
It sounds like the mainboard is shorting somewhere, or the PSU is bad.

I would suggest setting up a basic configuration (mainboard, PSU, CPU, RAM, videocard, FDD) and try to get this working properly first. Replace the PSU, test the RAM and run some other tests.
 
I found the solution. The person who built the system didn't put the mobo in correctly. All of the screws that go into the case that the mobo then is held onto weren't screwed in all the way. Somehow one of those was causing a short or completing a circuit or something. It's working fine now. Thanks for the advice.
 
Back
Top