Asus A8V - Help with one final issue?

denaps

Limp Gawd
Joined
Jun 4, 2004
Messages
432
Greetings,

I have just got my 3500+ and A8V and and running well, but I am having one last problem with the BIOS.

Upon boot, the BIOS reports "CPU fan error". The BIOS reads the RPM's of the fan at around 1600, but no matter what, it is always in red and reports an error. However, the fan seems to be working fine. I replugged the fan and even tried another fan, but the problem remains. I have to set BIOS to "ignore" fan speed in order to boot with no error.

I have just updated to the latest BIOS, but the "problem" is still there. Other than the error reporting of the fan, the board is working great.

Please help -
Jeff DeNapoli
 
My Father-in-law is running this board as well.

He had a similar issue, but plugging in a higher RPM fan (it was around 2600 RPM) made it stop. Apparently the board thinks a 1600 RPM fan is running too slow.

He finally did what you did (turning off monitoring) so he could run his Zalman copper CPU fan at the slow setting.

Don't know if that helped, but at least you aren't the only one with issues.
 
cool - it's good to know my board is not messed.

anyone know of a quiet fan that rotates at above 2500 RPM? I have a Vantec stealth but i guess that's too slow.

jeff
 
If your fan is using speed controls you should raise the fan speed to clear the problem.

That's *IF* your using fan speed controls. I don't know if your Vantec came with one or has that ability, but my Zalman is that way.
 
no the stealth came with no speed control - too bad, it's a nice fan.

jeff
 
Back
Top