Are these e4300 chips any good?

I have a E4300, ASRock 775Dual-VISA, 2GB OCZ Platinum PC3200 and a x800gto AGP card. 290x9 errors in Orthos. It's running 2.565GHz and stable. WIth a E6300 it would not even be close to that fast. For a mobo I payed $29 for (newegg open box) that's alright.Maybe with some mods it will go faster? I think it narrowly outperforms my 3GHz Opteron 165/DFI lanparty Ultra-D/PC4000 rig.

Sometime I'm going to swap it with my E6300 (that I bought back in July for $220 :eek: ) and see if it will go 3.4GHz.
 
e4300_1.jpg
 
Once I see a good amount of these chips putting out 3.6ghz @ 400 FSB. I will give in and say its the best OC chip on the market :).
 
Once I see a good amount of these chips putting out 3.6ghz @ 400 FSB. I will give in and say its the best OC chip on the market :).

and herein lies the problem: its not the best ocing chip around. that title belongs to the x6800. what this chip is imo is the best ocing chip for under $200.
 
and herein lies the problem: its not the best ocing chip around. that title belongs to the x6800. what this chip is imo is the best ocing chip for under $200.

The E6300 is also under $200 and is a better overclocking chip than the E4300 from all that is known today. The fastest stable overclock in the overclocking database for an E4300 is 3150 MHz.

As for the X6800 being the best overclocking chip that too remains to be seen: I have bested the fastest X6800 entry in the the database with my E6400. :D Surely one would think a $975 chip runs faster than my $220 chip.
 
and herein lies the problem: its not the best ocing chip around. that title belongs to the x6800.

Sorry. This is pure crap. See the overclocking database. 6400s have beaten it, and E6600s have flogged it by nearly 400 MHz.
 
Sorry. This is pure crap. See the overclocking database. 6400s have beaten it, and E6600s have flogged it by nearly 400 MHz.

true, the e6400s beat the x6800, but only by about 10mhz between the 2 highest. however, your arguement for the e6600s holds no water. the e6600 that beats the highest clocked wced x6800 by 400mhz is on phase, uses a $400 asus striker extreme, and uses some damn nice ram. the wc system on that x6800 isnt anything too special (nor is the ram; what brand is "team"???), and the abit aw9d-max motherboard goes for just over half of the striker's price. surely all that gives the e6600 a significant edge??? if u drop an x6800 into a striker, give it some nice ram, cool it with phase, and basically put it in exactly the same setup as that e6600, there is little question imo that the x6800 would oc higher.

and wdn: wait for someone to push an e4300 to its limits here. people here have been flogging e6300s in such ways for a while. i think the results of a similarly pushed e4300 will surprise us all.
 
Not everyone here care for the biggest e-dick. The matter is that the E4300 has a "guaranteed" 60% overclock to 3.0 GHz with only 1% chance of getting a crap overclocker is what matters. More is sweeter, especially when it drop in the 113$ in Q2. If you complaint that a 60% overclock is poor, go cry elsewhere since 60% is very very rare for any modern CPU.

You want a good chance to hit 3.6 ? Get the cpu with the most chances like the E6600. Can reach 3.6 GHz with a E4300, E6300 or E6400 ? More power to you.

Like I stated before, my own goal was to reach 3.2 GHz and if I can get higher, good for me but if not, no biggie.
 
^^agree with above, its a great chip and a great price I don't even have a problem buying one at 160. I also don't get the comment about that being on 500 dollar ram the main seller on this chip for anyone wanting to overclock is you can reach 3.0 on cheap ram and an even cheaper motherboard.
 
true, the e6400s beat the x6800, but only by about 10mhz between the 2 highest. however, your arguement for the e6600s holds no water. the e6600 that beats the highest clocked wced x6800 by 400mhz is on phase, uses a $400 asus striker extreme, and uses some damn nice ram. the wc system on that x6800 isnt anything too special (nor is the ram; what brand is "team"???), and the abit aw9d-max motherboard goes for just over half of the striker's price. surely all that gives the e6600 a significant edge??? if u drop an x6800 into a striker, give it some nice ram, cool it with phase, and basically put it in exactly the same setup as that e6600, there is little question imo that the x6800 would oc higher.

and wdn: wait for someone to push an e4300 to its limits here. people here have been flogging e6300s in such ways for a while. i think the results of a similarly pushed e4300 will surprise us all.

How's about this then: The E6400 (mine) that beats the other guy's X6800 is using a $220 E6400 CPU (vs his $975 X6800) , a $134 DS3 motherboard (vs his $260 ABIT), a $0 Ultra case and $55 Zalman fan (vs his $400 watercooled case), $200 Corsair memory with the crappy PROMOS memory chips (vs his $300 Team Xtreme). LOL. :p

In other words he has spent $1,935 on the above named components compared to my $613 yet mine is faster :D Three times the money spent LOL.

I have less than $900 invested in my PC case and everything in it.
 
How's about this then: The E6400 (mine) that beats the other guy's X6800 is using a $220 E6400 CPU (vs his $975 X6800) , a $134 DS3 motherboard (vs his $260 ABIT), a $0 Ultra case and $55 Zalman fan (vs his $400 watercooled case), $200 Corsair memory with the crappy PROMOS memory chips (vs his $300 Team Xtreme). LOL. :p

In other words he has spent $1,935 on the above named components compared to my $613 yet mine is faster :D Three times the money spent LOL.

I have less than $900 invested in my PC case and everything in it.

congrats, but its only a 10mhz margin. thats what, 1 3dmark or a few milliseconds of encoding time faster??? maybe ur lucky, maybe ur an ocing god, i dont know. besides, i admitted u had a point with ur proc. my problem was with your arguement for the e6600.
 
What's the better overclocker at stock voltage: the 6300 or the 4300?

I've got Ballistix pc28000.....yes I know it's overkill, but I'm getting almost as much for my old DDR as these cost me (within 10 or 20 bucks), so no biggie.

I'm using a 965p-DS3 Rev 3 board.

The 6400 is not something I'm going to buy at this point. I'm thinking the 4300, but the prices are close enough (because some idiot forgot to order the 4300 at MSRP last saturday :rolleyes: ).

Again, I'm very unlikely to run these with extra voltage, as I want to keep the system running as cool and quiet as possible while getting extra performance.

If it matters, I might upgrade the chip later this year, but that likely would only happen if I thought I could sell my chip just before a price drop.
 
Everything else held equal, the e4300 is a cooler overclocker. So you don't need to spend as much on cooling to get to 3 or 3.15 GHz. (I've run it with a stock Intel cooler). Reason is apparently because it's an Allendale, not Conroe, core- which means it has only 2MB the cache physically on the die as opposed to the e6300 which has 4MB cache with half of it disabled. That makes it run cooler, evidently.
 
And lets not forget that the E4300 still outperforms the 3800+, it's just marginally slower than the E6300 at stock speeds.

This afternoon I'll see how high I can get my E4300 running :)
 
And lets not forget that the E4300 still outperforms the 3800+, it's just marginally slower than the E6300 at stock speeds.

This afternoon I'll see how high I can get my E4300 running :)

At stock Intel spec settings the E4300 might be marginally slower but that is only due to the 800FSB vs 1066FSB. Lower the multi and ramp the FSB on the E4300 to the same 1.8Ghz the E6300 runs and then see once...
 
If it matters, I'll almost certainly reuse my Thermalright XP-90 to cool the CPU.
 
Yep, save $45 off the price of a E6400 by buying an E4300, and then you need to go out and spend $300 more on memory to the E4300 to get a decent overclock. LOL.

:D

That makes absolutely no sense given the 4300's 9x mult vs the 6400's 8x mult.

o.0.
 
Not everyone here care for the biggest e-dick. The matter is that the E4300 has a "guaranteed" 60% overclock to 3.0 GHz with only 1% chance of getting a crap overclocker is what matters. More is sweeter, especially when it drop in the 113$ in Q2. If you complaint that a 60% overclock is poor, go cry elsewhere since 60% is very very rare for any modern CPU.

You want a good chance to hit 3.6 ? Get the cpu with the most chances like the E6600. Can reach 3.6 GHz with a E4300, E6300 or E6400 ? More power to you.

Like I stated before, my own goal was to reach 3.2 GHz and if I can get higher, good for me but if not, no biggie.

E6300 run stable at 3.2 ghz on hardly any voltage
 
E6300 can overclock to 3.2 usually keep in mind.

at default voltage? My goal is to basically change the FSB to whatever the chip will do without any further fussing around. I'm not looking to break any speed records for a given CPU....just get the best bang for the buck while running a cool/quiet system.

A week ago, when Microcenter had the 4300 for $149, it was clearly the 4300, but I forgot to buy it and now prices are very close so it's a harder decision.

One thing that'd be nice is if h/w sites got agreements with Intel, AMD, and the various memory/graphics card companies to reimburse them on retail items. I sometimes think these parts are cherry picked for review sites. Then test best performance at default....best OC at default voltage and then best possible oc possible.
 
OCing the e4300 is very easy. I have 667 ram, so until i get some 800 ram i'm just running it at 333mhz fsb wich makes a clean 3ghz. No voltage increases, no overclocking the memory, nothing. Just set it to 333 and go :) I have a GA-965P-DS3 and it is a serious board. As soon as I get some DDR 800 I'll probably be closer to the 3.4ghz mark.
 
threads like this make decisions much more difficult for me to make (and more fun too).

i'm positive i could get decent numbers from both the e6300 and the e4300 but the number that matters most to me is the one prefixed with a $... and being from canada, i think i'm getting the scalding shaft at this point in time when it comes to purchasing a 'value' core2duo processor.

lowest price i can find on an e4300 is ~$250CDN(shipped) and the e6300, ~$300CDN (shipped). both processors are morbidly overpriced for canadians, in my opinion.

of course it's a timeless ritual (from an american perspective) to not care about canada, since we get the benefit of igloo-based cooling for our rigs. :p
 
You should check out NCIX.

They have the E4300 for $210 CDN and the E6300 for $224 CDN.

NCIX service is fantastic and shipping is dirt cheap. It's always cheaper than me driving around the city trying to get a good deal on a processor.

Every week they have a sale and every week these processors are usually available at the above price or better.
http://www.ncix.com/promo/promosale.php?webid=stpatrick2007
 
You should check out NCIX.

They have the E4300 for $210 CDN and the E6300 for $224 CDN.

NCIX service is fantastic and shipping is dirt cheap. It's always cheaper than me driving around the city trying to get a good deal on a processor.

Every week they have a sale and every week these processors are usually available at the above price or better.
http://www.ncix.com/promo/promosale.php?webid=stpatrick2007


i actually have ncix, canada computers, icct and (ugh) tiger direct open and i'm pretty much bang on for prices after tax/shipping.... buuuutttt....just checked my ncix mailing list sale and lo and behold, e4300 for $210. :D

so... should be about $230-$235 after taxes/shipping/insurance. still, RAPED. oh well, ncix is definitely a great e-tailer for canadians.


...which brings me back to reading forum posts to try and make a decision. i'm thinking that the e4300 would be my best choice in the interim before a reasonably priced quadcore appears. i'll upgrade my ram when i upgrade to quad.

thanks for the heads up on the sale.

:D
 
NCIX has a sister company that offers the sale prices all the time.
http://www.directcanada.com/products/?sku=12200BD3155&vpn=BX80557E4300&manufacture=INTEL

Their items come from the same warehouse as NCIX.

Newegg charges $169 US / $200 CDN for an E4300 so $208 or $210 CDN is hardly getting raped.

Their $9.99 for shipping doesn't buy you much gas these days for your car and I can't complain about getting things delivered to my door, usually within 24 hours.
 
threads like this make decisions much more difficult for me to make (and more fun too).

i'm positive i could get decent numbers from both the e6300 and the e4300 but the number that matters most to me is the one prefixed with a $... and being from canada, i think i'm getting the scalding shaft at this point in time when it comes to purchasing a 'value' core2duo processor.

lowest price i can find on an e4300 is ~$250CDN(shipped) and the e6300, ~$300CDN (shipped). both processors are morbidly overpriced for canadians, in my opinion.

of course it's a timeless ritual (from an american perspective) to not care about canada, since we get the benefit of igloo-based cooling for our rigs. :p

If you can wait a month, I'd do that and buy it after the prices drop.
 
NCIX has a sister company that offers the sale prices all the time.
http://www.directcanada.com/products/?sku=12200BD3155&vpn=BX80557E4300&manufacture=INTEL

Their items come from the same warehouse as NCIX.

Newegg charges $169 US / $200 CDN for an E4300 so $208 or $210 CDN is hardly getting raped.

Their $9.99 for shipping doesn't buy you much gas these days for your car and I can't complain about getting things delivered to my door, usually within 24 hours.



it sounds so cheap whenever anyone takes the time to explain it to me; about as cheap as it looks before tax/shipping/insurance/lubrication fees... alas, like the many times before, i checkout my cart and i can feel said mysterious fees making their way into my final price and ruining my 'deal'.

thanks for the url for the sister company too! now i can have 5 tabs open when browsing for computer parts... every 45 minutes or so. :p
 
If you can wait a month, I'd do that and buy it after the prices drop.


i pray for patience every night.

i have a huge compulsion towards anything electronic. especially anything to do with music or computers.

i'm already waiting for quad core... the time to upgrade from P805D is now and the decision is between e6300 or e4300.
 
The decision about the E6300 vs the E4300 should be based on the current hardware that you already have. If you have a setup capable of high FSB's then get the E6300. If you got something more moderate or don't want to push the high FSB's then get the E4300 for the higher multi (= easier overclock). I went for the E4300 for the higher multi so I could get a more moderate motherboard/RAM combo and still get good clocks out of it.
 
The decision about the E6300 vs the E4300 should be based on the current hardware that you already have. If you have a setup capable of high FSB's then get the E6300. If you got something more moderate or don't want to push the high FSB's then get the E4300 for the higher multi (= easier overclock). I went for the E4300 for the higher multi so I could get a more moderate motherboard/RAM combo and still get good clocks out of it.

Yup same reasons. I don't like the idea of having to spend $300+ on RAM to get a good OC. Plus I'm a gamer so the CPU doesn't make a whole lot of difference at the end of the day.
 
OCing the e4300 is very easy. I have 667 ram, so until i get some 800 ram i'm just running it at 333mhz fsb wich makes a clean 3ghz. No voltage increases, no overclocking the memory, nothing. Just set it to 333 and go :) I have a GA-965P-DS3 and it is a serious board. As soon as I get some DDR 800 I'll probably be closer to the 3.4ghz mark.


cool, running that clean 3 like you talked about. runs much better than my 805D did at 333. heh.
 
Yup same reasons. I don't like the idea of having to spend $300+ on RAM to get a good OC. Plus I'm a gamer so the CPU doesn't make a whole lot of difference at the end of the day.

Yeah, I like my E4300. Picked it up for MSRP of 162.99, added 2 gigs of cheapish OCZ DDR2 800 sticks, and got it up to 3.06 on stock voltage. Very pleased, this is a much better overclocker than the Venice core A64s :)
 
Back
Top