![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Antec (Sunon) Tornado
- Thread starter alderweis
- Start date
ignitionxvi
Limp Gawd
- Joined
- Apr 17, 2004
- Messages
- 324
i'm pretty sure if you have one red wire going to one tail, and a yellow wire going to the other tail, it will run at 7 volts (or so i've heard). I've always run my fans at 5 volts (one red wire to one tail, one black wire to the other tail). Try both and see what works best for ya.alderweis said:Hey guys, I have a tornado here that I got sick of... to damn loud. Anyways, I am wondering if there is a way to have it operate at half or quarter voltage without using a rheo. Sorta like a permanent mod... anyone know if this is possible?
Just solder in a resister in-line with either the Red or Black wire. I'm not sure what ohm resister you'd want to use but you could pick up a multipack of them from radio shack and experiment until you get an acceptable reduction. Honestly though, if you want to make it a permanant mod, why not just spend $5 or so on a lower RPM fan?
mikemodano9c
Limp Gawd
- Joined
- Jun 6, 2004
- Messages
- 316
alderweis said:Hey guys, I have a tornado here that I got sick of... to damn loud. Anyways, I am wondering if there is a way to have it operate at half or quarter voltage without using a rheo. Sorta like a permanent mod... anyone know if this is possible?
Vantec re-labels/resells the Sunon as the Tornado...not Antec...
buy a fan controller or wire it up to use 5 volts...
nightanole
[H]ard|Gawd
- Joined
- Feb 16, 2003
- Messages
- 2,032
Mines running at 5v fine. It is quieter then my coolermaster riffles at full speed, and the cpu is a few dergees cooler at full load then with the same size coolermaster led ones.
diredesire
Supreme [H]ardness
- Joined
- Feb 18, 2003
- Messages
- 4,516
2 options: change the molex pins around or solder a resistor into the 12v line going to the fan. You'll probably want a 100-150 ohm resister rated for 1w
If you change the pins around, change the ground for the fan to the 5v line if you would like a 7v operating voltage or if you'd like a 5v, change the yellow(or red) 12v line on the fan to the red from the PSU and the black/ground wire for the fan to a black from the PSU.
It's confusing to read-do.
If you change the pins around, change the ground for the fan to the 5v line if you would like a 7v operating voltage or if you'd like a 5v, change the yellow(or red) 12v line on the fan to the red from the PSU and the black/ground wire for the fan to a black from the PSU.
It's confusing to read-do.