Abit RMA, Now Reconsidering

GJSNeptune

[H]F Junkie
Joined
Mar 31, 2004
Messages
12,372
I ordered the parts for a new computer a few weeks ago, and it turns out the Abit AN7 had some SATA defects. So newegg refunded me since the motherboard is out of stock.

I bought a WD SATA 120GB hard drive.

Now I'm wondering if maybe there's another choice. My friend swears by Asus, and others swear by Abit, but some people have suggested DFI LanParty for their SATA features. But I can't dish out that much. I'd like to spend no more than $100, since the Abit board cost me $91 and then $16 to ship it back.

I'd like to OC later on, but it isn't necessary, considering my funds and being in school.
 
Bop said:
ABIT NF7-S, problem solved.

I second that. I ran that board with my OC'd 2500+ for over a year with no problems. Stay away from the NF7-S2 as that is a completely different board. As long as you get the NF7-S you will be fine.
 
I'll third that. Stick with Abit. I've had two Asus boards one was unstable and the other was DOA. I've had no problems with Abit boards, they are stable and overclock superbly.
 
You're looking at the wrong board, DO NOT get the NF7-S2 series.

Just the plain old NF7-S. Make sure its revision 2.0, the ones sold on NewEgg are.
 
I'll add my endorsement of the NF7-S (v2.0, not S-2)as well.......tried and proven good performer, and a good pricepoint too.
 
spicey said:
I'll third that. Stick with Abit. I've had two Asus boards one was unstable and the other was DOA. I've had no problems with Abit boards, they are stable and overclock superbly.

I've had the opposite experience. I think I've built seven ASUS machines without a problem. (One lost a power supply, but that was the power supply's problem.)

I've built one ABit machine, and it took three returned motherboards before it worked.

.B ekiM
 
abits NF7-s Rev 2 is one of the most stable boards I have ever used. ive built 7 systems with it, and alwasy suggest it as the only socket A board to use. It took abit 4 revs to get it right.. but they finially got it right and created a perfect board.
 
ive had the nf7-s rev2 before but i can honestly say i like my dfi much better. not a single problem with it and my vcore and vdimm can hit 2.0v and 3.3v respectively w/o any mods
 
Back
Top