Abit NF7 Bleep Error?

Global_Inferno

Limp Gawd
Joined
Aug 31, 2003
Messages
238
Does anyone know where to find out, or what an alternate pitch, long bleep on startup error means on a Abit NF7 MB?

It has a 2500+ and 512 of Geil Ram.
 
Since I'm bored, this came from the 2nd result in Google.

**Abit NF7-S Beep Codes
=========================
Basic Beep Codes for ABIT AWARD BIOS Motherboards

No beep at all - this means your motherboard is dead, either due to a
defective or underpowered power supply, poorly seated CPU or RAM, or a
dead-on-arrival board

One beep - board is working fine

One long beep then machine shuts down - faulty, improperly installed or
missing CPU

1 short(Beep) System booting is normally

2 short(Beep) CMOS setting error

1 long - 1 short(Beep) DRAM ERROR

1 long - 2 short(Beep) Display card or monitor connected error

1 long - 3 short(Beep) Keyboard Error

1 long - 9 short(Beep) ROM Error

Long(Beep) continuous DRAM isn't inserted correctly

Short(Beep) continuous POWER supply has a problem

A two-tone siren, generally caused by overheating or out of specification
voltages

Four beeps then machine shuts down. This is because this version of the
BIOS will shut down your machine if no fan tachometer signal is detected
on the fan header. Make sure you attach a fan to the FAN1 or FAN4 header
or clear CMOS to reset to default (no checking).
 
Back
Top