I have the IT7 that I am using now and managed to dumpster dive a working D865PERL. Now I know the 865PE will perform better than the 845E, but will this make up for the fact that I will loose my 400+ Mhz overclock?
Actually, you'll need matched pairs (must have the same PC#### rating and the set of four timing ratings) of DDR memory modules in order for any i865PE-based motherboard to perform well. (This means that if you're using PC2700 memory which is rated at 2.5-3-3-7 timings, the second stick must also be PC2700 with 2.5-3-3-7 timings as well.) If you're using only a single stick of DDR memory, the i865PE will likely perform slower (worse) than an i845E or i845PE.
Also, the D865PERL motherboard does permit slight FSB-based overclocking (up to +4% from stock FSB), through its so-called "Burn-In Mode." In the case of your 2.2GHz P4, the most that you can overclock to on that D865PERL motherboard will be just 2.28GHz.