A8N-SLI, setting ram 1:1?

Dr. X

Supreme [H]ardness
Joined
Oct 27, 2000
Messages
7,060
Alright, just starting to OC on this board. I have my 3200+ at 2.2 (220fsb) and when I check it in cpuz it reports the memory is also 220 (CPU/10.0). But if I move to 2.3 (230fsb) it reports that the memory is now at ~193 (CPU/12.0). How do I force the memory to run at 1:1 in the bios? I don't see a setting anywhere, and it seems to do this automatically for me. Any help?
 
there will be memory settings such as DDR333, DD400, etc...

Set it to DDR400 instead of auto...
 
wait, so I want it at DDR400, or one of the higher settings?
 
Ok, I tried what you said, but there's still a problem. If I set it to DDR500, say, it takes it out of manual overclock mode and puts it in auto, setting the HTT at 250 and all the other settings (voltage, multiplier, etc) to auto. But if I then switch it back to manual overclock, it puts the DDR500 back to auto. It's like I can't have it both ways.

edit: also, when I boot in manual overclock over HTT 225 it says the mem is DDR333. Anything 220 and below it says its DDR400.
 
You need to keeo it at 400 for a 1:1 ratio.......anything higher and it resets everything to make up for it.....like the fsb, ect.....right now i have my ram at 500 at 1:1. Thats 250 fsb for the late person....lol......let me know how ya make out! Goof luck!
 
Sweet. It's working well so far. I have it at 230 1:1. Seems rock solid. Think I should just keep pushing it?

Also, what timing is better for Tras? 5 or ~10? On anandtech's article they clock my ram at 2.5-2-2-5 1t at DDR500, but I've read elsewhere that in between 9 and 11 is better on nforce chipsets. Is this true? It's crucial ballistix pc3200 btw.
 
How much extra benifit do you get from running 1:1?

Mine is 9x250 with memory at 5:6 ~ 208 2-2-2-5-1T. I can get it 1:1 but with a looser timing. I am not sure if I can get 1T to work at 250Mhz.

2x512MB Corsair XMS 2-2-2-5 Memory.
 
You really want to have it on 1T, no matter what. Yes you can go higher with 2t, but at a major performance drop. Also, 250 fsb with the A8N-SLI isnt hard once you have proper cooling and know what to do, also the right bios helps BIG TIME. If anyone wants help or has a question, let me know.
 
I make it sound like my board is perfect......its close, but listen to this.....once i have the the new betas in, if i power down completly, where i unplug the psu or hit the power switch on the back of the psu, when i power it up, it goes haywire unless i do what you did, pull the battery from cmos. Now, i can turn my computer off, i do every day, i just cant unplug it or kit the power switch on my PSU. I never unplug or turn off the computer by hitting the psu switch so im fine, but the point is that why would it act fine then cut total power and it be haywire??? I figured it out by chance as well. I was installing a fan and unpluged the comp for safty and when i came back, it went bullshit on me. Reset Cmos and everything was fine again. I unpluged the computer agian to install my NVsilencer 5 on my 6800GT and again, Bullshit when i come back. So for me, im in heaven, i can overclock high, stable as a rock, and i can power down my computer at night and in the mourning when i power up im fine. Just i can never unplug or you know what will happen. I told you this story because i think maybe the battery has something to do with this.
 
Back
Top