'3D Towers' Double Disk Storage Capacity

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
According to this article at Engadget today, researchers have developed a way to construct "3D towers" that doubles the storage capacity of magnetic disk drives.

The team from SPINTEC created these pillars out of bit-patterned media -- separated magnetic nanodots, each of which carries one bit of data. By layering the dots in specific formations, the team created a "multilevel magnetic recording device" with an areal density of two bits per dot -- twice what it started with.
 
Sometimes it feels as if we're never going to get away from hardisks for mass storage. :(
 
Realistically, probably not for a while until we find a magical way to make SSDs substantially cheaper. It's ok though. For $500.00 now, you can buy 120GB extremely fast intel ssd + 2-2TB drives and have a total of 4TB of storage and 120GB for your OS and your most played 1-2 games. Its a bit of the best of both worlds.

Space to store thousands of games, apps, songs, ebooks and movies and the speed to access the important 0.1TB extremely fast.
 
I know this is a first, but still it's a bit sad, you add a whole other dimension to storage, and it only doubled?
 
Space isn't even close to the issue anymore with platter drives. Very very few people need anything more then a terabyte...hell most people probably reasonable get by on 100GB on their "system" drive.

Speed is totally the factor going against the platter. I'd be more impressed if a manufacturer some how found a way to put a head every 90 degrees or something and cut the access times in half or got the random access speeds up past a couple MB/s.
 
Sometimes it feels as if we're never going to get away from hardisks for mass storage. :(

Both hard disk and SSD will coexist for a long time.

While SSD is great as a system disk and also for games and other application, file storage doesn't benefit from them. Those DVD/Bluray backups or any data backups only needs to be done on a conventional hard disk. While it wouldn't hurt to use a SSD, its wouldn't be practical as long as normal hard disk are still cheaper than SSD.
 
Both hard disk and SSD will coexist for a long time.

While SSD is great as a system disk and also for games and other application, file storage doesn't benefit from them. Those DVD/Bluray backups or any data backups only needs to be done on a conventional hard disk. While it wouldn't hurt to use a SSD, its wouldn't be practical as long as normal hard disk are still cheaper than SSD.

+1 QFT
 
Space isn't even close to the issue anymore with platter drives. Very very few people need anything more then a terabyte...hell most people probably reasonable get by on 100GB on their "system" drive.

Speed is totally the factor going against the platter. I'd be more impressed if a manufacturer some how found a way to put a head every 90 degrees or something and cut the access times in half or got the random access speeds up past a couple MB/s.
forget a second set of heads. If they could figure out how to have the head for each platter read concurrently they could get a 4 or 5x speed up in high capacity desktop drives.
 
forget a second set of heads. If they could figure out how to have the head for each platter read concurrently they could get a 4 or 5x speed up in high capacity desktop drives.

Only if they needed to read the data in parallel. If all the data from the file you are reading is stored on one platter, then that wouldn't change anything. Doesn't help seek time either.
 
Forget that. Have a head for each block. Then you don't even need to spin the platters.
 
Only if they needed to read the data in parallel. If all the data from the file you are reading is stored on one platter, then that wouldn't change anything. Doesn't help seek time either.
No, you stripe the data by bytes so platter 0 has bytes 0, 5, 8...; platter 2 has bytes 1, 5, 9, ...; platter 3 has 2, 6, 10....; and platter 4 has bytes 3, 7, 11...

Then reading a sector accesss every platter concurently, just like in a RAID3 array.
 
So build in a cheap RAID 0 controller into each hard drive. Then build a 2nd set of heads into it. Then make them 15k rpm. Also make it a hybrid drive.

That drive would be mad awesome.
 
So build in a cheap RAID 0 controller into each hard drive. Then build a 2nd set of heads into it. Then make them 15k rpm. Also make it a hybrid drive.

That drive would be mad awesome.

More likely mad unreliable.
 
I can see it being more unreliable as a regular hdd, but you can build in redundancy functions. A regular controller and raid controller built in. If the raid function goes, it reverts to the regular. If a set of r/w heads breaks, it reverts to using just 1 set.

Personally, I'd love to see hdds that have easily swappable controllers. Seeing as that's what has broken on my hdds, before anything else does.
 
Sometimes it feels as if we're never going to get away from hardisks for mass storage. :(

We have an alternative, it's called Holographic Storage, however it's still in it's infancy (or simply ahs not been developed due to cost) so it will take some time for it to make its way to the consumer market. When it does a device the size of a HD will have hundreds of TB of storage on it...

Anyone ready for 4TB and 6TB HDDs? :D

I'll buy those! my media server will be quite happy ^____^
 
Back
Top