![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
2nd Reservoir Question
- Thread starter baja150
- Start date
Sideroxylon
Gawd
- Joined
- Jun 7, 2004
- Messages
- 734
You should be able to trap some air in there if it's mounted horizontally. As far as your water level, it depends where your outlet is and how much air has to escape before it finds an equilibrium.
Conversion $ to Euro = mult x 1.3
+ shipping/handling
Probably cheaper to buy the Innovatek unit. But if you call Sharka Corp they can get you the same one you got a pic of. They have a shipment leaving Austria in a day or two so if you want it I suggest you call right away.
+ shipping/handling
Probably cheaper to buy the Innovatek unit. But if you call Sharka Corp they can get you the same one you got a pic of. They have a shipment leaving Austria in a day or two so if you want it I suggest you call right away.
hi,
Why use a second reservoir, it will only decrease flowrate.
But if you wanted to mount it, it should be verticaly.
And this because of the air, air means bad flow.
But mounted verticaly your pump has to press about 50mBar more( from the looks of the reservoir)
You can take about 100mBar for each ascending meter.
Your pump should have specs telling what flow it produces BUT in relation to the pressure.
My pump has an flow of 2600litres/min!!!!!!!!!!!!!! at 0 metres.
But at 1,5 metres only 1000l/min
and after resistance of the CPU-,GPU-block,radiator, tubing,...
only 2.2litres/min rest!!!!!!!!!!!!!!!!!!!!!
GOOD PUMP IS EVERYTHING GOOD PUMP (then anything goes!!!)
Grtz
Why use a second reservoir, it will only decrease flowrate.
But if you wanted to mount it, it should be verticaly.
And this because of the air, air means bad flow.
But mounted verticaly your pump has to press about 50mBar more( from the looks of the reservoir)
You can take about 100mBar for each ascending meter.
Your pump should have specs telling what flow it produces BUT in relation to the pressure.
My pump has an flow of 2600litres/min!!!!!!!!!!!!!! at 0 metres.
But at 1,5 metres only 1000l/min
and after resistance of the CPU-,GPU-block,radiator, tubing,...
only 2.2litres/min rest!!!!!!!!!!!!!!!!!!!!!
GOOD PUMP IS EVERYTHING GOOD PUMP (then anything goes!!!)
Grtz
Top Nurse said:Conversion $ to Euro = mult x 1.3
+ shipping/handling
Probably cheaper to buy the Innovatek unit. But if you call Sharka Corp they can get you the same one you got a pic of. They have a shipment leaving Austria in a day or two so if you want it I suggest you call right away.
i would consider eather of them.. and your right about the shipping and handeling it would make them about the same buy the time they got to the states... but i live in hawaii and that means tack on anought 30$ ... i dont know about you but im not paying 100$ for a plastic cilinder... now if it where 30$usd plus shipping.. that i might consider..
thore