• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

2500xp

R

Rhino

Limp Gawd
Joined
Mar 11, 2003
Messages
138
whats better if u can get tighter timings, 200 by 12 or 166 by 14.5?
 
no go at 200 by 12, or 166 by 14, tried 200 by 11.5, almost but no, so im stuck at 200 by 11, if u up the volts even though it dont post, will uppin the volts make it post?
 
Yes, but it will probably run hotter than you want it to. You will probably have to up the volts quite a bit if it doesn't even post.
 
Originally posted by Rhino
no go at 200 by 12, or 166 by 14, tried 200 by 11.5, almost but no, so im stuck at 200 by 11, if u up the volts even though it dont post, will uppin the volts make it post?
Click to expand...

Try increasing your Vcore to 1.75v

Also, when did you get this Barton? If it was within the last 5 months or so, odds are it's locked up. Make sure the changes you make to the multi are actually taking effects (boot into Windows, check with WCPUID or CPU-Z, shutdown, reboot into Windows and check again)
 
You must log in or register to reply here.
Back
Top