• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

.

mashie said:
Interesting, can you get 1920x1200 out of a HDMI port when you use a HDMI to DVI adaptor?
Click to expand...

Yes. For a while I've run a Dell Studio laptop with the HDMI port connected to a 24" 1920x1200 monitor using an HDMI to DVI cable. You can convert from HDMI to DVI without any 'conversion' happening, it's the same signal. Only area of concern I think is if you need dual link DVI (27"+ monitor or 120Hz HD signal). I think it's HDMI 1.3 or better to support dual link DVI modes but I'm not sure, it could be vendor specific.
 
David_CAN said:
Yes. For a while I've run a Dell Studio laptop with the HDMI port connected to a 24" 1920x1200 monitor using an HDMI to DVI cable. You can convert from HDMI to DVI without any 'conversion' happening, it's the same signal. Only area of concern I think is if you need dual link DVI (27"+ monitor or 120Hz HD signal). I think it's HDMI 1.3 or better to support dual link DVI modes but I'm not sure, it could be vendor specific.
Click to expand...

Well, the Sapphire card apparently has HDMI 1.4. The specifications list "HDMI (with 3D)" and AFAIK only version 1.4 supports 3D.
 
You must log in or register to reply here.
Back
Top