Search results

I have the 850 XFX no problems here at all. Larry

Sent you a pm as to the size of the panel, LMK if its the right one. Larry

I may have a side panel in about a week as I have that case as a spare,(used of course), and may be selling the guts but the doors will be available. PM or email me for questions, should know for sure by monday night. Larry

I have a choice of either an Antec Signature 850W or XFX 850W that I have up for sale elsewhere, might be a bit more than you need but pm or email me if interested. Larry

Double Wide server case. 5 x 120mm intake 3 x 120mm exhaust Power supply fan 2 x 80mm fans 1 blowing over NB and 1 blowing over my RAID card 1 noisey Asus fan on the mosfet cooler as I Water Cool. Go figure. Larry

"Did a check for the CPU temp, and I saw that the CPU temp reached 125 degree before it turned itself down." Can you elaborate on this statement? Is this temp in celcius? Also what do you mean by turned itself down, off or the temp lowered? It sounds like you may be running too hot, is the Fan...

Back up top

YHPM Larry

Seasonic makes great PSU's.

I'm in for this.

I'm running the 197.45 drivers since yesterday, only played COD4 so far but am having no problems so far in Win7 X64. I uninstalled in Win7, rebooted to safe mode, used CCleaner to clean out the registry and installed 197.45 in Safe Mode. Like I say no problems so far. Card is Water cooled and...

I have a Zippy 700 Watt PSL 6701P. Great condition. PM me if interested, I actually have a thread on AT as to the unit. Larry

If I turn my brightness on mine over 60 or so I'd have Retina burn, may be something wrong with the one you opened up. Larry

Heatware added, Thank you for the very good deal! Larry

Just ordered one thanks for the heads up OP. Larry

I don't post much here but just bought 1 from the egg. I have an older Samsung 215TW now but only play COD4 and the like on occasion here. Getting too old for the fast paced stuff here. Any good settings for the monitor? I just wish the S or M-PVA monitors were closer to my budget. Larry

Pms returned. Larry

YHPM on the card Larry

I am pretty sure that PCP&Cooling actually do not make power supply's from scratch, but order them out with specific specs for Thier units from OEM's. I think Seasonic made thier Silencer units and Win-Tact made or make thier Turbo Cool units. I was also under the assumption that PCP&C are...

Just goes to show my eyesight is shot! Thanks for clarifying that. Larry

It does that here to me as well sometimes, up at the top, next to the refresh/X is another double arrow thingy. Click that and it puts it in compatibility mode, works then. I think it has to do with pictures in the threads. Larry

Should be a setting in the boot menu in bios for quick boot or something to that effect. Try that. Larry

I have 1 pair, 2x1gb of Cellshock DDR2 1000 rated 4-4-4-12 that I have had stable at 1186, 5-5-5-15 with 2.1v. LMK if you are interested in them. Larry

I can't get my Megaraid 320-2E Scsi Raid card to be seen in 7, nor a 39160 or a 29160 Scsi card/s. Maybe there will be updates later. Larry

Not sure about that, but Office 2000 runs on Vista. Larry

Yes it seems so, but if you bounce from 1 to the other it works. Larry

These links work for your key, but you need to be signed in to live or whatever, then refresh each 1 a few times. Just got my key from the first link. THANK YOU for the links. Tried all afternoon and got squat! Larry

Thanks for the link, I got 1.96mb/s with my connection. Like everyone else, just need the key now. Larry

PL= Performance Level. Also called Ai Transaction Booster. Larry

Its on the Asus site on the left hand side. QVL that is.. Larry

That sucks. Thing is, with quite a few Asus boards, on Auto with voltages they go way higher than they should be. Have you installed CPU-Z yet? If not, google it, get the latest version and see what it says your Vcore is at idle. Larry

PCIE Frequency= 100 to 101, not 333 OK, 3 stars, Try those settings now. 2 stars, try them later, but it is best to NOT run the voltages I changed on Auto. Once you have it stable you should be able to get transaction booster to 9 or 8. You can try LLC Enabled for better stability also...

I would try some other ram, just to be sure. Larry

I would uninstall the vid card drivers, then boot into safe mode and use drive cleaner or such and clean out the vid drivers with that, then reboot and install newer or the same drivers over again and see if that clears the problem up. Also it wouldn't hurt to clean the vid card, blow out...

That particular 610 watt supply is a good 1 so Yes to your question. Larry

Right click MyComputer on the desktop, choose Properties and then when the box opens choose Hardware. Go to Device Manager then look at the Sound categorie, see if there is an exclamation mark or something along those lines, if so you'll need to expand that and have it reinstall the drivers...

I had that post code on a DFI LP LT P35. It needs a new bios chip. Praz over at DFI Club explained a procedure to me and I tried it but did not work for me. You can try it tho.. Pull everything out of the board except for the vid/cpu and 1 stick of known good ram, and have the ram in the...

LLC is Load Line Calibration, its in the voltage section. Larry

Are you turning the PC off via the OS or by the button? Try turning off LLC in bios if it is on. Larry

I have the same ram, kinda Highly doubtfull you will get 1T out of it, or any ram for that matter short of a miracle. I could be wrong about that tho. I just happen to have my settings on the clip board, so here ya go. Larry Q9400 2x2gb 1406 bios Settings at 8x480 10/07/08 FSB Strap =...