Looking at OLED and LG WOLED and Samsung QD-OLED reddits my impression is that LG has way more of reliability blunders and QA blunders. Especially this year Tandem 77 is a uniformity and reliability joke. Wouldn't surprise me if years from now we see massive spike of edge rot issues reported for...
C6 newest firmware review https://www.youtube.com/watch?v=4QbpHAX4a2U
It looks like LG "fixed" near black issues by copying implementation Samsung's used in 48S90H using the same panel.
Maybe a bit better on LG but they pushed the TV much higher luminance so maybe at the same e.g. 100 nits it...
Found review of my monitor describing my issue exactly https://www.xda-developers.com/msi-mag-271qpx-qd-oled-monitor-review/
Anyone knows if people who designed 271QPX were fired from MSI and new people (or AI) know how to make sRGB mode in gaming monitors?
I like how I can disable all dimming...
This Samsung doesn't crush blacks as in cutting near-black levels converting them to pure black but lifts levels kinda converting itself to IPS... one with still great contrast ratio but still IPS-like.
If its terrible or not depends on brightness used and also ambient light.
I wonder how LG...
Ended up NOT returning this TV.
Compared to 3-stack WOLED and QD-OLED it has good cyan levels and therefore colors.
Only OLED I can put next to Pioneer Kuro plasma and not laugh at 2008 TV soundly beating new tech.
Otherwise panel works best in 120Hz without VRR.
VRR at 120Hz when framerate is...
On 360Hz screen the effect is ok but its still nowhere near CRT level of motion sharpness. CRT shows literally zero difference between moving and stationary graphics. I doubt it significantly better at 540Hz.
Thankfully if you want to play old consoles the CRT TV are very cheap. They are...
VRR flicker eliminated itself and I have zero idea how and why. Now I run the same Cyberpunk 2077 and it doesn't flicker 🫨
I mean it does when game stutters and very occasionally but it was flicker-fest before. Now its good. Was also good on PS5 in game with fluctuating fps.
Tested 165Hz vs...
I can confirm 165Hz mode has a bit worse gradation. Not by much but I did notice some slight anomalies in gradients at some levels of brightness which I haven't seen in 120Hz mode. Might be entirely coincidental and non-existent difference though.
I disabled DSC to get integer scaling and I...
I must admit I might overestimated state of VRR implementations of OLEDs. Two of my OLEDs (LG 48GQ900 and MSI 27QPX) have great VRR implementation. Apparently TVs are hardly as good.
These photos are from 60fps @ 165Hz at low brightness so worst case for this issue.
Still even at 100 brightness...
I tried changing few service menu options but I have not tried any resets yet. I really doubt anything except either fw update or someone figuring out service menu option for VRR can help. As I understand so far no one found how to calibrate VRR compensation on Samsung OLED TVs. Though there is...
Reference image without VRR. Camera isn't great but it should give some idea how game should look like normally. In real life it looks very good, very deep blacks and details nicely fade to black.
And this is with VRR
Does VRR itself work... technically yes but who even cares if picture...
Picture is worth more than thousand words so...
Otherwise other than that it would be a decent monitor. Has Tandem WOLED matte panel and very nice colors. Text looks ok on it.
Has also some other issues but compared to this its just nitpicking.
There is literally no near-black levels. Just...
Yes, you can get IPS if your don't want burn-in displaying static elements. That is one of the reasons why IPS panels are still around in high end and will be for quite a while.
Big monitors only made sense when TVs had lag and other limitations like 4:2:2 color subsampling. Or perhaps HDMI has limitations not allowing sufficient bandwidth for specific supported video mode e.g. HDMI 2.0 could only do 4K 120Hz with 4:2:0 subsampling but DP at the time could do it at full...
Lag certainly doesn't make aiming easier. You can compensate for small lag but its another process you need to run in your head and especially if you want to actually feel movement instantaneous.
The thing is that even if you can fool yourself you don't experience lag it doesn't make you aim...
It is possible to slap some RGB LEDs or even R, G and B LEDs together and make display.
Anything where you need to assemble ready-made displays is pretty much no go because you inevitably hit and issue: what to do with bezels/gaps?
I simply don't know if there is any method to hide the gaps. If...
How would that be achieved exactly?
People have used multiple CRTs to make giant screens but you always had visible gaps between CRTs.
Any optical method as in using glass I don't think could ever be perfect and it certainly wouldn't make such display any lighter.
Much better idea is to use...
The faster you go the less effects such as electrons repelling eachother which defocus beam happen so scaling the beam wouldn't be that big of an issue.
Bandwidth-wise we already got to 400MHz-esque levels of video bandwidth going from VGA card to CRT through VGA cable as analog signals and then...
The only lag that matters to me personally is hand movement vs how camera changes because it is what causes motion sickness. Kinda like in VR but a bit less because immersion is not as immediate - much harder to dissociate yourself from game world in VR. And is hard to immerse myself when...
Not sure if Intel locked IMC in locked/Xeon CPUs but I would not be surprised it has limits.
Should not matter for DDR4 though and especially if you are trying to get memory on a budget.
One issue I see is that Xeons are usually quite picey when new. They are only super cheap when pulled from...
Strobing doesn't need to add any input lag.
In fact without adding lag we could also have brighter strobing and at least without full screen brightness limitations.
Unfortunately strobing is not only not a focus but there is a lot of incompetent people responsible for making these displays so...
If frame rate was something you chose in separation to anything else or something only limited by monitor then there is rarely any point to not using highest fps you can use.
In reality fps is not free lunch and FG is terrible compromise which causes massive input lag. In this case its better to...
Pretty much all displays except most basic non-gaming office offering these days are compatible with Nvidia GPUs where it comes to variable frame rate tech.
Just not all of them specifically claim G-Sync compatibility.
I wouldn't call strobing "natural".
Also needing more hardware... not an issue if we have hardware.
I just don't like these fake frames because the fake frames that we got are pretty bad because they make games more laggy.
When Oculus did frame gen I loved it because it solved the main issue...
After carefully thinking about this I came to the conclusion that the best summary to what FG is is single word: SCAM
It would not be and might have its use cases like these suggested by some people if it was reprojection. Otherwise trading latency for fake frames is just... ridiculous.
Like...
At the time LB2 monitors were a thing was about the last time you could get something like FW900 for ridiculoussly low prices like $100. I got mine at the time friend got LB2 monitor and comparing the two... yeah, no comparison really.
It was pretty cool to see LCD that sharp in motion and at...
My attempts with anything turbo resulted in much higher vcore than I have expected to see and clocks dropping like crazy with load so I gave up on it quickly.
Looking at discussions about RPL overclocking a lot of people use offsets and get good results. They seem to control some strange...
You mean it as the max clock in hwinfo64 not being for all core but merely momentary reding across all cores?
To be honest I have no idea how turbo boost actually behaves in this platform other than my tests indicating I didn't really see much if any improvements doing benchmarks in typical for...
1800MHz (3600MT/s) at these timings is pretty good considering I got overpriced underperforming 4400 ram and when I got second pair they did together similar to your 3200 sticks and at considerably higher IMC voltages than what I needed for two sticks.
Or in other words I have/had much more...
On CPU-z you have mem controller frequency 800MHz. I have 2000MHz. Are you running in Gear 1? You should for DDR4 run in Gear1 as Gear2 is for DDR5 basically and runs part of the IMC at half the clock. My understanding is that its better to run Gear1 than 1T if either one had to be at 2.
Also I...
On my 13900KF @ 5.4GHz/4.3GHz flat with zero turbo boost and without Hyper-Threading so 24 hardware threads.
DDR4 4000MT/s CL19 2T
My only load that I care for (Quartus) runs mostly on single core (so much so that giving it 1 P-core and 15 E-cores would yield only 1s slower performance versus...
I installed very old Win10 from original install pendrive. It detected only 8 cores.
Windows update to 10.0.18362 and there are 24 cores and somehow threads are scheduled to P-cores first.
To make testing a bit ambitious I set E-cores to 43, 42, 41 and 40 (in groups of 4 E-cores) and P-cores...
Prim95 makes the issue extremely visible but I do get worse overall lag than I should when cpu is loaded 100% with normal real workloads. It just isn't so bad as to cause me to be like "something is bloody broken".
Cache issue, ring bus, etc. I would say should not affect such things because...