Search results

You have all details that you need in your post. The card will be fit.

we need your fan rpm to the temps to say yes or no ^^

How high are the temps difference with and without this 40mm fan ?

replace the fan of the black ridge with an Noctua NF9x14 then the sound should be better.

i thibk an test with the noctua 92x14 will show the real performance of the black ridge and with the 120x15 i think oc will be possible

how the 120mm fan works on the cooler ?

This test is not good. The cooler would be testing in an open setup and it would be use only the standard fan. I think the temps in the A4 Case would be more diffirent to the Noctua L9i/a

In the test of anandtech they write: „RTX 8000 is equipped with a full 48GB of VRAM (24 chips in a clamshell configuration)“. It looks like there be 12 chips with 2Gb on both sides (back and front)

I use the Falcon II on an 1151 motherboard so i think te Nexus will fit too.

But more heat in the case.

Why the 120aio blow in the case and dont blow the heat direct out of the case ?

I Hope this work :D it looks amazing

D10S simple dont use the i/o Shield and use distance pices to get more space betwen the mainboard and the riser

DonDon What is going on on your website?

Maybe you can use the internal wifi antennas from streacom: http://www.streacom.com/products/infi2-internal-wifi-antenna/

where i can see the speed of the Case fans in M and MM mode ?

Simple use for your 3,5" hdd's an nas and build an SFF with the upcoming DAN C4 Case.

DonDon you can Start the kickstarter Projekts c4 and Hslp-48 at the same Time and can offers in the project c4 the option to order the Hslp-48 too. Maybe you sell then more as 1000 pieces.

Which temps you get in the sentry ?

i miss that the watercooler cool the m2 SSD too. and the mobo chipset is longer time air cool, would be better this where watercooled too but on this position it is a little bit difficult :D

DonDon maybe you can use the Gigabyte board there are the ram slots on the side of the board and maybe it will work with normal high of ram if you rotate the heatpipes to the side of the ram. Can you maybe check this in cad with your cpu cooler model ?

But i think you will get better cpu temps if you use an 92mm fan on the cpu cooler because the most of the air would be blow over the sides of the cpu cooler.

blonda007 have you test the temps with and without the top fan ?

i rly like that conzept which display you wanna use ? What i dont like is that all the cables come out of the top of your case if you want stay it on desk i think it look better if the cable come out at bottom.

@aquelito maybe if you use watercooled gpus you can add a secend dual 80mm Radiator in front. Maybe this is enought to cool both gpu and cpu, cause i think the full system will be so hot with air cooled under load.

And for the sides the nexus has two extra parts. they are where used as fan holder and closed the fins on the sides. you can see it here, the black sideparts: Sideparts

would it not better if the sides of the fins are being closed like the nexus cooler. If its open the fan will suck warm air of inside the case.

Maybe you should check not only the cpu temp, check the mainbaord chip Temps too. I Think they will be so much better if the cooler blow on the mainboar.

Yeah i can upload the files ^^ Here are the files.

Hey Guys, cause of i dont do this for an profit, i dont plan a international shipping. if there will be a second order is not sure. Sry for that ^^

can you say me which external AC-DC PSU perform up to 400W Power ?

And have one of you a worklog or samething else?

Know anyone a worklog or a build where bifurcucation would be use and an itx mainboard in combination with two Gpu's like two R9 Nanos ^^ ?