Search results

Can some one help me out i don't have a DTS Key sticker and my UUID is gone as i re-programmed my bios chip so i have a DTS key sticker off a old Asus board that's dead i want to use this key to make a new UUID but don't understand completely on how to reconstruct one? the code is 4 numbers to...

Ncase M1 with extra NO ODD Top Cover $200 AUD + Postage Australia buyers only. Location Perth Australia http://imgur.com/a/1eba4#0

Used FrozenQ M1 Reservoir forsale $50 USD + postage Location Perth Australia

I'm selling my Custom PP05-E Flex Cables i modded i made these cables to match the Asus impact/M1 layout as seen in the photo below, Kits comes with 3 main cables, 24PIN ATX, 8PIN ATX and PCIE cable, I can also mod the SATA cables if you need those changed. All I'm asking is what the kit cost me...

Some coil whine is normal not all PSU have the problem but some do and it doesn't affect the unit at all if i took a PSU back to a shop over here they wouldn't replace it because of a whine, Most PSU's get the problem when your GPU is under load but I've heard coil whine when a system has been...

No not at all seeing the price of the Impact IV when it come out was $349 the price wont change much.

I had to send my board back to asus i dont aspect to see it for 2 months, So i was going to upgrade to the Impact VII but thats a month away as well so i think ill be going with a X99 chipset instead so i can SLI.

If any one is looking for one of these here in the AU message me.

You can now pre-order the board here in the AU but its release is almost a month away http://www.pccasegear.com/index.php?main_page=product_info&products_id=28699 I said to my self if a X99 board comes out 1st like the Ramapage VII ill be going for that.

I found one site that some how list this board as in stock i just don't trust it lol.

Just shorten the cables that come with the SX600 all you need is the tools, Probably best to put a fan grill on the fans to stop any cables pushing into them.

The H100i isn't fun to cram into the M1 ill hate to try it with a H105 the piping is a pain in the ass to and ends up pushing down on your board.

Thanks good to know.

The release of the Impact VII is close Asus has the product page up now. http://www.asus.com/Motherboards/MAXIMUS_VII_IMPACT/

When overclocking in the M1 you also have to think about the cooling/air flow over the Power board, As your CPU mite be running cool when your board is cooking hot from lack of air flow.

Question does the Frozen Res fit the M1 V2 reason i ask is because of this change below?

Hey Phuncz are you talking about the bend from each connector because the cables that come with the SX600-G the length is like 5x as long as the cable you get with the 450w and even the flex cable set you can buy.

Nice build :) any reason you faced the PSU inwards instead of facing out?

You can fit 2 SSDs behind the front panel doesn't matter what PSU your using, I only have the V1 so i had to make my own brackets they changed the SSD brackets with the V2 so they would fit i believe. http://i.imgur.com/mp8FaXJ.jpg

What about mounting both SSDs on the front behind the front panel, that's what i did and just brought a external DVD drive if i find i never needed to use a DVD which I've used like 4 times in the past year :p .

Yer i can't disagree with you there, The requirements set for any GPU do very depending on what chipset, CPU and other components your using, Which is probably why they recommend more power then really is needed, For example lets take a power hungry CPU lets say FX-9370 with 220W TDP, 6 HDDs, 4...

MSI states that the GeForce GTX 780ti needs 42A and a 600W PSU minimum in there FAQ here Power requirements for graphics cards , I don't mean to piss people off saying the 450w can't power these components but for me the unit seems to have problem doing so after long hours of gaming which is...

Nar its not the overclocks because i don't run any its the power supply, I don't care what you guys say i have tested my system using another PSU with no problem! Also you don't know what your talking about Phuncz so just drop it! I got these problems in summer i live in Australia so...

I had a few problems using the 450w with my 4770K and GTX780TI after long hours of gaming i would get a random reset and some times a anti-surge warning, I think the unit may have been on its limits.

Yer it does cost more and does take more time to set up but it was fun ;) . The H60 i tested when i 1st got my M1 wasn't any better than the factory intel heatsink on some tests it was worse. Also didn't like how the tubing was rammed in there.

I wouldn't use any closed loop water cooling units in the M1 at all if you go water mite as well go a custom loop.

I got my tools from MDPC there a really good site.

Yer i know the cables mite as well be for a ATX case, I watched a few youtube videos on how to make ATX cables then i brought the tools then shorted them it was really easy to do, It took around a hour to do all 3 cables and a mixed cable for my drives, Which had 2 SATA ports and 1 molex for my...

I removed them by using clump grips and a rag. I also used plastic its a lot easier to work with i used an old laptop case lol. I will be uploading some new photos soon as I'm updating my build :) .

Yer you will need the basic tools to make ATX cables, But its well worth it looks so much better in the end less clutter.

Yep got mine today also, But i wont be putting it in until i get my board back from RMA, Hey Jambo you mite want to look into changing the length of the cables as they will be to long, I brought a set of the same cables that come with the 600w and resized them to match my board, Ill be able to...

I may upgrade my board to one depending if its released before i get mine back from RMA lol, looking at the CPU layout the my water block with fit right onto it.

Same here mite got shipped out today i ordered mine last Friday when they 1st got listed so really the unit has been up for pre-order for some time.

LMAO guess you never heard of the pin adapter that works of the PSU using a remote, Plus who the hell would using a ROG board that cost 3 times as much as a normal board for a HTPC :confused: .

Ordered mine yesterday there still showing stock so i wouldn't worry about it when PCCG goes out of stock they change the product status.

Woooooooooooo Yay for them bring old PS2 back :eek:

Only some people had this problem i never did on both of my boards.

Nice thanks. can't wait to get it to try it out i have to wait for my board to come back from RMA 1st as it had a cooked VRM :(.

So nothing really worth upgrading to plus i already use a M.2 drive on my Impact i wont be upgrading it for some time so the PCI-e support i have no use for.

Asus says Q3. So the only real difference i can see is the M.2 and the ability to upgrade your CPU one more time when broadwell comes out correct?