Search results

Will this one day be made available? Kickstarter?

Has anyone tested will Noctua NH-D14 fit in this mb? And it's possible to use gpu? Edit. Installed and fit fine.

Who has SF600 in build? I am interested to know how much that make noise? I tested this SF600 but when fan starts spin that never stopped because temperature in case was too high. So how I can make better ventilation in case? Because now I am using SFX-L and setup is very silent but I have...

Is there anything similar bags? In thread is few but more?

Sorry for late answer but I use HyperX Fury memory.

I got mine today. Installation was easy and when the computer is in idle fan don't spin. But little gaming and fan start spinning. I noticed that psu make something brii noise. Edit. That noise coming directly from fan. When I stopped that sound end. Now after gaming fan is still spinning. I...

Very nice job.

http://imgur.com/a/yI3TA

You didnt check those pictures? But it only touch little bit and bend ram but not too much. Work still fine. That wifi card should fit fine and Asrock using Broadcom chipset in wifi.

Wifi card is connected to mb. Mpcie. http://www.asrock.com/mb/photo/Fatal1ty%20Z170%20Gaming-ITXac(L2).jpg What card? C14 fits and Dark rock tf but touch the ram. http://imgur.com/a/yI3TA I dont know.

Should be not any problems.

Cooler is fine but make terrible noise with 6700k and also not so much power keep cpu cold when cpu was default settings. Maybe cpu which has lower tdp works better but my opinion is that it is not just the best solution, if you need silence and want to keep cpu at least stock settings. And...

I am not sure but Asus mb upper heatsink may block this Be quiet cooler.

I am using this extender: http://www.ebay.co.uk/itm/ARC1-PELX16A1-C11V3-11cm-ribbon-HD7950-R9-290X-1-slot-PCI-E-x16-riser-card-/271663995770 ARC1-PELX16A1-C11V3 (11cm ribbon)

And also rams are Kington HyperX DDR4. http://www.kingston.com/us/company/press/article/7673?Article-Title=HyperX-Releases-FURY-DDR4-Memory;-Adds-High-capacity-Predator-DDR4-Kits If you want to know dimensions.

Bottom heatsink.

Damn I remember wrong. I installed Be quiet Dark Rock TF back to my MB and it's fits perfectly and also PCI-E is clear so you don't need to use pci-e extender. Cooler is so quiet which is good. Only problem is that cooler will little bit bend your memory but I have used this setup about 3 months...

Let see when I got new thermal grease, then I can start installation.

Which cpu cooler you will get? or you have not decided yet?

Where is that list? I am not sure what they think but let see again when I got my thermal grease to attach this Be quiet again. When I was installing that cooler I think that was only way to get that on mb. Edit. Found. http://www.bequiet.com/en/motherboardcheck Edit2. Maybe solution is put...

I had also this cooler and works fine. 6700k @ 4,4GHz about 85C max temps. I have now also tested C7 and Fractal S24. C7 = noisy as hell S24 = pump noise DR TF = best of all, quiet and keeps temp enough low. Edit. For Be quiet. Block your pci-e connector so you need to use extender and also...

I got my Fractal S24 and installed it. That pump noise is something between quiet and hell. Let see if that drop down or maybe its back to air. That was quiet.

I have used my own asrock since release and non problems yet. But has anyone tips how to put gpu with backplate in this case? Should I try that new PSU mounting racket to fit this SFX-L or not? I currently use pci-e extender but now I can't get any fans to bottom. Any pics?

Thanks. I think that I will go with Fractal Design S24 because there is that X backplate. Because in Asrock MB has some circuits in back. http://i.imgur.com/wSsmRrX.jpg Edit. Or H105 will be little bit better but not sure how that backplate fits...

Which is best AIO water cooler? Should I go 240mm or only 120mm? I am currectly run 6700k with C7 but that noise is killing me. Why C7? I wanted to test that and that cooler if fine if you underclock your cpu because when you are running stock C7 is not enough. Should I go with H100i GTX...

I installed today Cryorig C7 this mb. Backplate is little too big if you are using m.2 SSD and also there is circuit which is able to catch backplate. I did little modding and remove some plastic in that backplate. Pictures: http://imgur.com/a/P3vGs

That C7 backplate looks like a big. Any information if that block or not m.2 connector in MB back?

I have tested my setup also via IBT and XTU. IBT temps are little bit lower that Prime95 2.87. XTU show much lower temps under 80c. When I play temps are about 61-65. So I think that all are good but air flow with Ncase now is very bad. Maybe I need test will that second fan help someway...

p95v287 Downloaded here: http://www.mersenne.org/download/ I know that my air flow is not so good thats way I am looking more information how those temps are. I think that they are little high but I think that bad air flow is the problem. That 4400 has been very stable. I tested also 45 but...

Who has working Skylake setup? I am interested know temps. I am currectly using Be quiet Dark Tower TF and running my 6700k @ 4400MHz, 1.216V and temps are about 86C. If I drop volts prime95 usually get hardware failure what indicates too low volts. My setup is ASRock Fatal1ty Z170...

Asus has got H170 mb on their site but not Z170. But that m.2 its that full speed? And not drop pci-e x16 channel? http://www.asus.com/us/Motherboards/H170I-PLUS-D3/overview/ Because then those might not drop on Z170 mbs.

Yup best chose now.

I don't understand why Asus has to make board again where PCI-E line drops because with Z170 should not longer be a problem. Asrock solution is disable SATA Express.

How this Pro gaming specs? Any news? Because I am interested to know if that mb include usb c.

I readied here somewhere that Asus is releasing own ROG Impact ITX next month. Is this real thing or not?

Is anyone tested Be quiet! Dark Rock TF with Ncase? And also how HyperX Predator fits inside? RAM's are about 55mm high. Cooler is still open. I want pics etc.

Sorry didn't noticed that 50mm.

I have only 2.0 motherboard and there is working fine x16, no dropping. So I think that 3.0 work fine because that is supported. http://hardforum.com/showpost.php?p=1041444048&postcount=437...

http://hardforum.com/showpost.php?p=1041444048&postcount=437 And no any effect to performance.

http://www.bequiet.com/en/cpucooler/570