If you're worried about a DOA board, buy it from a vendor with a decent return policy. It'll go back to the vendor rather than the manufacturer.
I like Newegg, but they don't pay return shipping in some circumstances.
The spec for the X79A-GD65 (8D) claims 128GB, using unbuffered RAM.
Are you quite sure that registered memory (which is buffered) will work?
I guess that the spec is aimed at the 16GB DIMMs that may be available in the future. There was a similar thing with the X58 boards: some makers...
Maybe.
I've used Acronis True Image (Home), although I haven't updated it to the latest. I wasn't able to figure out how to use it to clone a 160 GB HD onto a 128 GB SSD, even though the space used on the HD was much less than would fit on the SSD. (Perhaps other versions of Acronis TI offer...
I didn't try it.
Applying power to a motherboard without a CPU is not, as far as I know, a standard test.
Perhaps you should return the board, and wait until you can afford to buy the necessary pieces before you buy one again. I hope that Microcenter has no return fee.
I hadn't noticed the "upgrade kit". I suppose that the external USB enclosure is worth the extra $25. I wouldn't need it; I already have an external USB SATA HD dock. And a screw driver. I'm not sure about the value of the Acronis "migration" software.
According to Asus, not all.
http://event.asus.com/2011/mb/PCIe3_Ready/
For example: their P8Z68-V Pro will support Ivy Bridge, with BIOS 0902 or later. No PCI-E 3 support, ever. If you want the updated PCI-E support, you'd need the /Gen3 hardware revision.
They list other boards without...
You might have a look at this one:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820233191
(120 GB Corsair Force GT.) I believe that it uses the same Sandforce controller, although it claims better specs than the HyperX. It's cheaper, too. The 10 days I've been using one probably...
If you want to use an air cooler, this one will support RAM shorter than 44 mm:
http://www.noctua.at/main.php?show=productview&products_id=35&lng=en
This one will support taller heatsinks, if you use only the upper fan:
http://www.noctua.at/main.php?show=productview&products_id=37&lng=en
The board can only use DDR2. DDR3 has the same number of pins, but it is electrically different. The two are also notched differently, so they won't physically fit in the other's socket.
http://www.crucial.com/store/listparts.aspx?model=Inspiron%20530&Cat=RAM
Crucial sells up to Dell's...
I beleive that all boards with that chipset (680 SLI for Intel) have PCI-E X16 slots, so they'll take this card.
It appears that the card comes with both a full-height bracket and low-profile ones, so you should be fine either way.
Best for what purpose?
If you need a monster for crunching multiple threads in Photoshop, you want a board with an X58 chipset (Socket 1366) and a 6 core I7 CPU. You'll get triple channel memory support, for the highest available bandwidth.
(You could go further: the Xeon equivalent for...
One thing to remember: PCI-E 3 will only be available with an Ivy Bridge CPU. That may not be available until the end of the second quarter (June) of 2012.
You could go with low-profile RAM:
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820233199&Tpk=CML8GX3M2A1600C9W
(Low-profile version of Corsair Vengeance. It's not particularly cheap.)
Do you have the manual?
It gives a method for recovering from a bad BIOS update. However, it requires that the machine be able to POST far enough that the utility can run. If your display never displays a message about searching for firmware, you may not be able to recover.
There are a...
I don't recall the numbers, but I believe that the data rates of PCI-E 2.0 X8 are higher than PCI-E 1.0 X16. Whether a pair of 8800GTXs would benefit from the bandwidth of PCI-E 2.0 X8 may be hard to find out, as the cards are a couple of generations old. I know of no review sites have tested...
This seems like an odd request.
Boards that have two or more PCI-E X16 slots, and support both SLI and CrossfireX, are common. You'd want one with either a P67 or Z68 chipset. (Either would limit the PCI-E bandwidth to X8 if two card were used, but that is not supposed to degrade performance...
Why not use the "compare" feature at www.asus.com?
The full-sized ATX version has two PCI slots, and second PCI-E X1 slot, that aren't on the microATX board. (ATX, 7 slots, mATX, 4.) The ATX version has two third party SATA controlllers, while the mATX has one. The mATX board uses a Realtek...
I'm using a Xonar DX in that slot on a P8Z68-V Pro. It fits without difficulty (other than being pretty close to my GTX480 graphics card).
I haven't checked how similar the motherboard heat sinks are, but I expect that there's no issue on the Deluxe, either.
Dual Socket 2011 boards may be common.
They may mostly be server boards, though. The question is whether anyone will develop a version for the desktop. (The eVGA Classified SR-2 used an Intel 5520 chipset, and Xeon CPUs. Server pieces, in a system for high-end gaming.)
As far as I can tell from the specs comparison at www.asus.com, the boards are identical except the Pro adds the Marvell 6Gb SATA controller, plus two IEEE 1394 onbaord headers (no rear I/O panel sockets).
Is the integrated graphcis support any different on the non-Pro? Asus lists Virtu...
According to MSI,
http://www.gigabyte.com/products/product-page.aspx?pid=3287#sp
the X16 slot is PCI-E 2.0. (The second X16 slot is X4 electrically.)
How good the CrossfireX support is, I don't know, but MSI claims it.
I didn't suggest that it's not a good price for a Z68 board.
I don't know what silk186 would regard as "budget choices", but the phrase suggests $50(US) boards to me. There are no sub-$100 Z68 boards at Newegg, which means that I wouldn't expect to find one anywhere.
It doesn't feel right...
I turned the fan around and mounted it using the plastic mount on the side away from the DIMM slots. No interferences there. The cooling performance seems to not be degraded. (I switched to a third-party PWM fan.)
If you want to overclock the CPU and have onboard graphics, Z68 is your only choice. (P67 has no onboard graphics, and H67 does not permit overclocking.)
www.newegg.com lists a number of Z68 boards with HDMI ports. They're a good place to search, even if you're not in the area they serve (USA...
I think that Ruoh refers to the 12V CPU power connector. (It's an 8 pin one on this board.)
I doubt that's your problem, though, especially as you've swapped power supplies.
CPU support list for your board:
http://support.asus.com/Cpusupport/List.aspx?SLanguage=en&m=P5N-D&p=1&s=22&hashedid=yQYfAtkxxZMjR79G
It includes some old Extreme series quads.
Whether any upgrades make sense from a cost/effectiveness viewpoint, I couldn't say. (For about $600-700US...
As is the dual BIOS on an MSI P67A-GD65. It's possible to get the primary BIOS into a state where the machine won't boot from it, and it won't invoke the backup BIOS.
I hope that the Z68 boards will be more forgiving.
After the flash (using EZFlash), the machine rebooted. I powered down and cleared the CMOS before it acheived whatever state it would have booted to.
Maybe that was an error.
Either way, the P8P67 Pro was my second P67 board that was rendered unbootable by a BIOS update. The first was an...
I had one of those. Flashing a beta BIOS killed it. The system wouldn't boot using the new BIOS, and apparently the second BIOS is invoked only if the other one is corrupt (failed checksum, maybe). There was no way that I found to force the use of the backup BIOS. Perhaps the dual BIOS works...