Search results

  1. S

    Official ASUS P8P67 Series Overclocking Guide and Information

    Those numbers were made before the PLL overvoltage fix, so that's why they're so low. They basically tell you how high you should expect with pll overvoltage disabled.
  2. S

    Corsair AX-1200 watt whining

    I'd spank it, and if that didn't help the whining, I'd RMA it.
  3. S

    Corsair 750 TX enough?

    This power supply wattage calculator is pretty good: http://extreme.outervision.com/psucalculatorlite.jsp.
  4. S

    Stability & Benchmarking software

    For hard drive benchmarks I usually use HD Tune.
  5. S

    Stability & Benchmarking software

    I recommend linx with the latest linpack binaries. You'll probably have to download the linpack binaries seperately because they're usually out of date. Linx is known to stress systems harder than any other stress test, and I use it for stressing my overclocks.
  6. S

    If your overclock is not 100% stable, does it harm your system?

    Have you tried installing the latest linpack binaries for Intel Burn Test and installing Windows 7 SP1? The old linpack binaries don't stress sandy bridge processors enough, so you can pass a stress test with it and still not be stable. I'm guessing that's the problem. You need SP1 to use the...
  7. S

    Is Biostar's P67 B3 out before others?

    It was a pretty minor change, and it was really affecting their bottom line to not have any 1155 motherboards for sale, so it seems doable to do it in a month. I know I wouldn't have bought an 1156 or 1366 if I knew sandy bridge had already been released.
  8. S

    post your Crysis 2 performance

    I don't think you read his signature. His system is about as good as you can get. Beats the hell out of mine at least.
  9. S

    Considering 2500k over 2600k

    The lowest I've seen anyone be able to go with a 2500k is 4.4, and that's with pll overvoltage disabled. Most can hit 4.6 pretty easily. Incase you don't know, pll overvoltage is an added feature in newer BIOS versions for sandy bridge motherboards that let you overclock higher than you would...
  10. S

    P8P67 Available?

    There are now biostar 1155 boards on newegg.
  11. S

    Asus rampage iii gene booting from sleep state

    What hard drive are you using? I had this problem because of a large hard drive. There was an update from microsoft that I had to install for Windows 7. I think that SP1 comes with the patch already, so if you haven't installed it yet, that will probably fix your problem.
  12. S

    Is 2000Mhz RAM worth it?

    I agree with everyone else. I wouldn't even buy 2000mhz ram if I was buying ram for a new build and didn't already have other ram. 1600mhz can usually be overclocked to 1866 or even 2000.
  13. S

    CAS 9 vs CAS 7?

    Like everyone else is saying, it usually doesn't make a huge difference (maybe 2-3%), but you'll probably be able to overclock the memory a little higher. I'd probably go with the CAS 9.
  14. S

    Mixing Kingston HyperX Blu 4GB(2 x 2GB) and Patriot G series ‘Sector 5’ 8GB(2 x 4GB)?

    It's usually not a good idea to mix different types of memory (especially if the CAS timing is different). Some motherboards support setting different timings depending on the channel, so if yours does, that may work, but I'd probably try to set the timings the same. Just set the timings based...
  15. S

    Question about B3 RMA

    I think that ASUS is doing the advanced RMA for all motherboards (not just the upper end) for this recall.
  16. S

    Asus shipping new boards this week

    I noticed microcenter has also increased their 2500k prices by $20.
  17. S

    Asus shipping new boards this week

    I'm sure they'll enjoy their monopoly for a day or so. All of the people waiting for SB motherboards to come back in stock will probably jump at this.
  18. S

    Just received a new email from MicroCenter about my SB Board

    I'm guessing that the z68 boards will be a little more expensive, so if they do the $25 gift card, that may offset the difference in price.
  19. S

    Been out a while..Catch me up?

    I'd also recommend an i5 2500k. You'll save about $100 from the 2600k, and you're pretty much guaranteed a 4.5 - 4.8 ghz overclock.
  20. S

    "Potentially" bad new for people wanting to upgrade to the 2011 socket set...

    If you want to upgrade now, I'd go with a 2500k. You'll save $100, and it can handle pretty much anything you can throw at it.
  21. S

    Intel Sandy Bridge 2600K and 2500K Processors @ [H]

    If you put some viagra in the box, it should help.
  22. S

    post here what processor do you have?

    i5 2500k
  23. S

    Considering 2500k over 2600k

    I have a 2500k, and it can do pretty much anything I can throw at it. The 2600k isn't worth the price premium to me.
  24. S

    CPU PLL for an i5-2500k overclock

    I doubt that PLL is affecting your overclock at 4.5 ghz. If you install Windows 7 SP1, you can use the newest linpack binaries with linx that support avx instructions. This will stress your system more thoroughly and bring out any instability. I'd then run prime95 blend overnight. I also found...
  25. S

    Help me over clock my i7 870...

    There's a good i7 overclocking guide at http://www.masterslair.com/199/how-to-overclock-intel-core-i7-i5-i3-cpu-overclocking-guide/. I'd try reading that first. It's pretty thorough.
  26. S

    Acceptable max temp for Sandybridge + uneven core temp

    For some reason with Sandy Bridge, core 0 is always about 10 degrees less than the highest core. It's normal.
  27. S

    SOLVED 1305 brick downgraded to 1204 hotflash

    I had that problem. I just needed to update the .NET framework to 4.0, and that fixed it.
Back
Top