On my 4P
6903 - tpf~12:30, preferred: 5 days, final deadline: 12 days, credit: 22706, k: 38.05
8101 - tpf~12:00, preferred: 2.4 days, final deadline: 4 days, credit 22607, k: 49.43
If the final deadline of 8101 increases to 8 days then the PPD between the two are more comparable.
Finally the OC BIOS is loaded and my quad 6176SE are humming along nicely at 210. With that I get around 5:54 with 6901. Thanks tears and everyone who make this OC dream a reality :)
Will push the limit higher when the folding rig gets a better home.
You are probably right, musky. Could be my Seasonic PSU is faulty?! and not related to rails.
Thou it would be informative to know what PSU the 4p folders are using...
Another update: I changed the PSU from Seasonic X-1250 to Antec HCP-850 and board has been folding non-stop since yesterday. I really think the shutdowns were due to the PSU, in particular the difference between single and multi rails.
For those who has the SM board (H8QGx), which PSU do you...
Hmm... interesting :)
Update: I turned off the computer overnight and switched it on this morning. Everything went ok folding-wise. No shut down. By the time I left for work it's still running fine. Let's see how things unfold...
PSU issue? I will swap to another one tonight and check...
This is really frustrating. The issue is back to haunt me again!!
I have been folding fine (all a4 cores) with quad 6176SE using ubuntu 12.04 beta and fah v7. I then changed to 10.10 and the problem starts again. I notice every time fah runs for a 10-20 seconds and the computer just shut down...
I am now using only JPW2 and JPW3, no splitter.
FYI the system shut down again during the afternoon with the 6274s running. Should I flash the original BIOS and try to see what happen?
I checked the VRMs around the CPUs - they are around 40C with fan blowing directly at them.
The machine just shutdown again :( I think I will reinstall the CPUs, check the board and make sure everything is in order.
Thanks.
i can try a different psu. FYI this board has been used with a quad 6274 and everything worked fine. Only after I swapped to 6176SE this problem occurs.
I really don't know if there's a short.
VRM - you are talking about the chips with the heatsink on top next to the top 2 cpu sockets?
Hi all,
I posted this in the OC thread but should have started a new thread discussing this.
I have the SM board and quad 6176SE. It's powered by a Seasonic X-1250 PSU and cooled by Noctua U12DO. Temp around 47C on folding. However, the system unexpectedly shutdown after a period of...
Thanks for the suggestions, but I am using a Seasonic X-1250 and got a huge fan blowing directly at the VRM of the 4 CPUs. Northbridge(??) temp was around 50C.
I hope it's not CPU related :P
Sorry a bit off topic - I am testing a quad 6176SE. For those who has these CPUs, what's your temp from tpc at 100% load? Mine is about 47C using balanced setting in BIOS with Noctua U12DO A3. The problem is that the board shuts down unexpectedly after I run fah for 5 mins. Otherwise it's...
I think Intel is testing our patience. I doubt these unlocked E5 would be cheap.
At the mean time I think 4p G34 has the best performance/$ in regard to bigadv folding.
I agree. 7/16 ID tubing and 1/2 fitting should be enough. Just test run it before you put them on the board. Tell you a scary story: One of the tubings got loose on my 4P G34 setup and the water spilled everywhere on the board. Well I was lucky that the whole thing still work after some...