I wouldn't think that should affect memory. After the BIOS flash you said you got BSOD every time until you tried the higher timings again. So is it booting to Windows now?
If still having problems might try running Memtest+ like jubrany suggested and see if errors show up, also at what block...
Gskill rates the 2x2Gb kit at 9-9-9-24 but if you're using two kits you may have to loosen the timings some. It's always more taxing on the memory controller to address 4 sticks than 2.
The manufacturer rates their memory at those timings when used exactly as sold in the kit. ie. 2x2Gb
If you're using two of those kits to get 8Gb then you will have to loosen the timings as you discovered. It's always more taxing on the memory controller to address 4 sticks than 2.
Yes it should not be worse, however it may only be slightly better, depending on how much the game relies on the cpu.
For the games you play you may get more bang for your buck if you returned the 460 and used that $150 on a new board and cpu. I bet you could find a nice AM2+ board and Athlon...
If you swapped in the new card and then cranked up the game graphics to max, it's not an apples-to-apples comparison vs your old 8800.
Use 3DMark, Furmark, some benchmark program that you can compare scores or fps between both cards using the same graphics settings.
Yes your CPU is for...
It doesn't matter how much of a "bottleneck" your CPU is, a 460 should not perform worse than an 8800. At the very least it should do the same or slightly better.
Rather than state it "feels like" it's getting worse FPS, how about running a quick benchmark or two and confirm?
I would...
If you're set on Thermaltake, for that price go with the Frio, that's the best cooler they make.
If you want something almost as good for a lot less money, get a CM Hyper 212+
An extra 200MHz on the CPU isn't going to make any significant difference in your FPS.
You don't mention what power supply you're using. The 8800GT would have used a single 6pin PCIe power, and the 460 requires two. Do you have enough power for it?
That's pretty messed up that ATI cards won't work right in an AMD board, but nVidia will, heh. Particularly since they're the same generation hardware.
An AM2 processor will work in an AM2 or AM2+ board.
An AM2+ processor will work in an AM2+ and some AM2 boards with BIOS update - although HTT will be limited.
An AM3 processor will work in an AM3 and some AM2+ boards with BIOS update - although HTT will be limited.
Note that AM2/AM2+ are...
I tried it out with a 5870 and 9600GSO (G92). 3DMark Vantage score went from 21362 to 23272. I'm sure it would be a little better with a more powerful nVidia card, but not sure if it's worth the hassle.
Most motherboards will automatically disable the onboard video when it senses you have installed a discrete video card.
He may have shorted something out when unplugging/plugging the power cord for the new optical drive?
Rather than guess at replacing parts pick up a power supply tester if...
Certainly seems cheap for that high a rating. Doesn't list runtimes at load though, that 85-95 minutes has to be unloaded given how small that unit is.
I've always used APC, currently a BR1500LCD almost 2 years so far on original battery. Curious what model you had before?
Cooler Master used to offer the Aquagate Viva for VGA liquid cooling, and Thermaltake had it's TMG series add-on blocks for it's BigWater systems, but nobody makes anything recently AFAIK.
The native resolution on the Optoma PT100 is 854x480 which is widescreen but not high def 720p. From the description it seems it is designed more for game consoles like the Wii which only does 480i/480p anyway.
The trouble with using that on a computer is it's not a standard resolution that...
This happens occasionally with my 5870 and 7 64bit. Only twice I think did it ever fail to wake up from sleep. For awhile there I had C1E disabled and of course the problem went away.
Make a 5V/12V toggle switch for a molex connector passthrough, then just daisy all your fans behind it.
http://www.thebestcasescenario.com/forum/showthread.php?p=238910#post238910
Adding a 7V option makes it a little more complicated but a 5V/12V is easy.
Your second BIOS pic there shows UCC is enabled. That's why it's unlocking your 2 extra cores.
The active core control allows you to manually enable/disable individual cores. Like for example if you knew only core #3 was bad, you could turn on the other 3 and leave that one disabled.
Do you really need an FX board? It sounds like you're looking more for mainstream features and the FX is AMD's top of the line. For example, you can get an Asus M4A88TD with SATA6 and USB3 for under $100. Only reason to go FX really is for CrossFire.
Yes, with less than 3½W per fan doubling them up is no problem. You could even run 3 per channel if needed because you plan to have them turned down anyway.
Rather than buy a controller though, unless you need to be able to crank them up occasionally you might consider just switching the...
With those small cube cases it's almost impossible not to have the HSF close to the PSU. As long as it's not interfering with the fan it should be okay.
Yeah that's probably close to the limit for stock voltage. My prev 965 C3 needed 1.5v to run stable at 4Ghz but with some better cooling that should be no problem.
The stock AMD heatsink is still basically the same size since the Athlon XP days. They did put in a copper base and heatpipes for the high end Phenom chips but still use a paltry 70x15mm fan and it has to spin that fast just to keep em cool.
If you keep returning cards worried that you are missing out on performance or losing money just because a new model comes out you never get to enjoy the one you have. I'm still using a 5870 because it gets the job done and the new stuff isn't significantly better to warrant the hassle.
No it only means they have not tested it. Obviously they can't test every possible manufacturer/model so there will be many that are not "approved" but will work fine, just look for something with similar specs.
Memory speed won't affect the overclock of a 2500K because you're using multiplier not bus. Whether you need 8Gb depends what you use the PC for. Why not a 1600MHz 4Gb kit?