Search results

  1. S

    Dead X58 motherboard... replace or other socket?

    After 2 years & 3 weeks my Gigabyte GA-X58A-UD5 motherboard suddenly died on me. Kinda leaves a bitter taste since its just out of warrenty. I was running this in combo with an i7 920 D0. Half the time it was running on 3.8ghz. My question: Would you replace the mobo with another decent X58...
  2. S

    HP ZR24w

    There is no point in doing so... The default black level varies around 0.45 cd/m² if i remember correctly which is poor so it's normal you are not pleased at how the display performs in this regard. Calibrate & it will be fixed. Every type of display needs to be calibrated to get the most out...
  3. S

    HP ZR24w

    The reason why the color is so drastic is because of the hue/saturation levels of his cam recorder. For you it might be extremely blue, on his monitor it might look greenish or red depending on the white point of the monitor. Like mentioned a couple of posts above me you need to calibrate to get...
  4. S

    HP ZR24w

    You won't like to hear this but RMA... definitely not normal. The zr24w doesn't suffer from any kind of annoying buzzing sounds that plagues some other panels out there.
  5. S

    HP ZR24w

    Black levels are fine but you need to get your hands on a hardware calibration tool to calibrate properly. You will never get the same kind of result using someone else's icc profile. These are my results: http://img109.imageshack.us/img109/8875/27037494.jpg
  6. S

    HP ZR24w

    Black levels are fine but you need to get your hands on a hardware calibration tool to calibrate properly. You will never get the same kind of result using someone else's icc profile. These are my results: http://img109.imageshack.us/img109/8875/27037494.jpg
  7. S

    HP ZR24w

    Default settings yes. If you calibrate the screen properly you can get black values of 0.17 - 0.18 cd/m2 which are good. (very good if you consider the price range)
  8. S

    HP ZR24w

    I'm sorry but i think you are experiencing IPS glow. Why do i think this? There was a guy (way back into this thread) who had 3 replacements for the exact same reason but didn't see any improvement at all. If i remember correctly it was also his first IPS screen. If it starts to slowly...
  9. S

    HP ZR24w

    It all depends where you are located.. From previous posts i get the impression US customer service is much more effective & faster than UK or EU customer service.
  10. S

    HP ZR24w

    :) I was only speaking for my setup of course.
  11. S

    HP ZR24w

    Same here, i start to see a slight glow from a foot away, increasing if i move closer. But that's way too close to be sitting to a 24" screen anyway so i don't see the problem...
  12. S

    HP ZR24w

    The black depth at default settings is mediocre (=pure black looks like *very* dark gray) while the color accuracy actually is very good out of the box (which is not common). You need to calibrate to vastly improve the black depth. I can achieve a black depth of 0.17 cd/m2 which is considered to...
  13. S

    HP ZR24w

    Thx for the clarification, makes me wonder why someone would even consider to buy a HP DreamColor..
  14. S

    HP ZR24w

    Blackbird Good remark/question but you kinda answered it yourself already. I'm in no way enough informed to give a technical answer but if you can trust tftcentral.co.uk it seems that every single panel they review (cheaper or more expensive) seems to be troubled by this "issue". Lower...
  15. S

    HP ZR24w

    I don't have my colorimeter right now but judging from a white screen i also have a slight deviation towards the bottom of the screen on both of my panels. Though definitely not to the extent i would even consider replacing them. (first time i really notice it) I will post updated results next...
  16. S

    Lian Li PC-X900 thread....

    slick case
  17. S

    HP ZR24w

    You won't. Perfect doesn't exist in this price range. Or, to put it differently: For the price you have to pay this is considered to be perfect. The big question is: Did it bother you in any way before you saw the actual numbers? If it did, replace it & you'll either get a slightly better...
  18. S

    HP ZR24w

    Try different calibration software (for example basiccolor: http://www.basiccolor.de/english/Datenblaetter_E/squid_E/squid_E.htm). It has been mentioned before (>20 pages back) that certain calibration suites report inaccurate black levels. I think it was spyder2 or 3 software, i'm not sure...
  19. S

    HP ZR24w

    Yep, low priced LCDTV's are crap compared to the technology behind a decent pc monitor, if you think it's better though nobody is stopping you from using one as a computer screen!
  20. S

    HP ZR24w

    I see where you are going with this MaZa, tftcentral even backs up your statements --> "Further adjustments would be made at a graphics card LUT level as part of the automated calibration process and creation of an ICC profile." So you should be right but I hope you believe me when I say that...
  21. S

    HP ZR24w

    No idea why he's saying this... probably because he's using a wide gamut display & he's talking from his experience. You can't compare the two displays. Edit: MaZa uses a HP LP2475w which is wide gamut so he has this issue. This does NOT apply to the ZR24w.
  22. S

    HP ZR24w

    You're not missing anything, there are NO banding issues whatsoever if you calibrate properly. The biggest complaint by some users after reading the review were the "unacceptable" black levels but the reviewer screwed up his calibration. If you have a colorimeter to calibrate properly this...
  23. S

    HP ZR24w

    Either you have a crappy pc or your paying way too much... jk of course ;) That's quite an upgrade I must say comparing it to the ZR24w, it's like shopping for a honda but coming home with a porsche! ;)
  24. S

    HP ZR24w

    Try basiccolor, 2 week trial but you will be able to measure black levels :): http://basiccolor.de/english/Datenblaetter_E/squid_E/squid_E.htm
  25. S

    HP ZR24w

    LOL LOL LOL & to think i kept my mouth shut... when i read the review i thought I had some sort of rare uber panel, then i thought "nah" the professional must be right, i did something wrong. Calibrated again with the same results but still decided to keep my mouth shut because another review...
  26. S

    HP ZR24w

    It's the weak point of the screen yes but black levels really aren't that bad imo unless you're used to a LP2475W.
  27. S

    HP ZR24w

    If i remember correctly you mentionted white looking sort of grayish/dull & you didn't really explore custom color mode? To me that was an indication something possibly went wrong during the pre-calibration setup. But if you're sure you did everything correctly then who am I to doubt you :)...
  28. S

    HP ZR24w

    I really hope your second display will meet your expectations but I can't deny that the above comment (& your previous edited post) makes me think there was nothing wrong with the first monitor to begin with... Of course I havn't seen your display but your comments/complaints makes me think you...
  29. S

    HP ZR24w

    Are you sure it's at the lowest stand? It should be very easy to press, also if you put cabels through the hole in the stand to hide them, make sure you didn't put them all the way through cause they could block the screen from moving.
  30. S

    HP ZR24w

    I've also been scratching my head how he was able to achieve the target luminance level with that brightness setting... But as much as it's worth to you, backlightbleed is pretty much non-existent on my model & it's calibrates just fine, I do have to add that the quality (bleed, IPS glow, ..)...
  31. S

    HP ZR24w

    Yep, i was happy with my purchase no matter what the outcome but i'm still glad to see it confirmed I spend my money well. I'll probably order another one next month to complete my setup.
  32. S

    HP ZR24w

    Well.. the first reviews will be around at the end of this week, you placed you're order just a bit too soon. I honestly don't know what the best choice is. When the ZR24w was announced back in january it was labeled as the main alternative to the Dell U2410 but I guess you'll just have to wait...
  33. S

    HP ZR24w

    I know we use different calibration tools but are you sure you calibrated correctly? I can easily achieve a luminance of 120 cd/m2 at +- 6500 kelvin with a black depth of 0.17cd/m2 at hardware level without having to adjust any settings in Windows(standard settings) or at gpu level.
  34. S

    HP ZR24w

    Turning the brightness all the way down & adjusting the contrast is not enough, you need to adjust the rgb settings manually as well, maybe that will help a bit but there has indeed been somebody who had to RMA the display due to excessive white glow. Maybe try these settings: Brightness: 4...
  35. S

    HP ZR24w

    nice, great customer service :) that's one of the reasons i first looked at hp. i wonder if dell's customer service is as smooth.. heard some bad things about it in the past.
  36. S

    Thinking about 2x30's or 3 24's

    If money is not an issue i would go with 30" setup. 30" might seem a bit overkill let alone two but i guess it's similar to 27", you'll get used to it in no time & it will be hard to ever look back... :) Pardon me for asking but do you game at all? A 5870 seems a rather strange waste of money...
  37. S

    The epic search for a rust-proof case

    My thoughts exactly...
  38. S

    HP ZR24w

    What i find rather suprising is the amount of negative comments of people who got the display & are turning it back. For a second it makes me feel lucky but then i realise people have a good one probably don't feel the need to post anymore :) rberger, like i said a couple of pages ago (this...
  39. S

    HP ZR24w

    ok so i followed the recommendation of rberger & i calibrated my monitor with the basiCColor software. I used the preset sRGB profile, the only thing i changed to the target measurements was the luminance. In the preset it was set to 160 cd/m² & I changed it to 140 cd/m² (as in PRAD.de reviews)...
  40. S

    HP ZR24w

    Thx for the info, i'll look for the software & update my results in this thread. Also http://www.tftcentral.co.uk/ should have a review up in a couple of days.. My product number is VM633A, where is the second part of that code located on the back? Didn't find anything that resembles it...
Back
Top