everything is workin fine now, the only problem i have is the 3 time boot thing.
Basically first time i press the power button, it makes a huge starting noise for about 4-5 seconds then turns off. Starts again after a second or two, tries and then stops.
Third time it starts and then beeps...
I just put everything in and started it up, and it worked! proud of myself much haha
However! I've only just done it this minute and here are the findings:
My PC boots, you can here everything starting to go, and then it stops, does it again, then stops..then on the third try it fully...
Just wondering what the best way to replace the PSU is?
Take the PSU out, then put it to one side and take out all the cables that they lead to
Or take all of the leads out and then take it out? :S
Or should i go from the PSU and follow the leads to where they go, then unplug? :D
To be honest, i've been believing you over them, as it sounds as if they're recommending a PSU as if i had like 3 HD's, 2x4850's and a quadcore or w/e :eek:
Gonna buy that 450 sometime today i think :)
Right :@ sorry to keep posting as you've helped me loads, but ive asked the same question on another tech support forum, and they've been saying..
&
So yeah..not sure what to do :((
Just seen on the side of the 4850 box it says
"450 watt or greater power supply with 75 watt 6-pin PCI Express power connector recommended"
Does the Corsair have that? http://www.overclockers.co.uk/showproduct.php?prodid=CA-016-CS&groupid=701&catid=123&subcat=1084
Yeah im gonna get the Corsair 450w i think.
So i get the card, put it in that top black pci-e slot. Plug one end of the power cord in the video card and the other in the corsair PSU, put it all together and thats it?
edit: also people have said il need a minimum of 500-600 :S
Also, will my...
Yeah but the 450 is too much :( im poor atm haha
Its between the 400w corsair and the 500w OCZ.
Also, thanks for the PCI-e help. however, im still unsure as to where all the leads go, like the power cable 8 molex thing that comes with it etc
:(
Right your all gonna hate me after this :)
Just opened my unit up again and tried to see where the card would fit in, and i do not have the faintest idea. I've taken some more pictures inside but i can honestly say ive not a clue. It also says i'd have to plug the graphics card power cord in...
How is a 400w better than a 500w though :S confusingg.
The 450w is more expensive than the 500w.
Also, someone said the 400w is the bare minimum to get? surely it would he playin it safe to get a 500w? or will that 400w be able to handle the card?
60 quid though? Surely there must be something cheaper?
http://www.maplin.co.uk/Module.aspx?ModuleNo=221194
Wouldn't that do the job? As you can see, im tryna cut the costs, don't need anything top of the line, im using it to play a couple of games and just basically run the 4580 without...
ok
In conclusion, im not going to "just try it" :)
But now i need a PSU that WILL fit in to my Dell, like for certain, as i've heard a lot don't fit in Dell's for some reason :S:S
I'm going to attempt to install the drivers and load up the COD4 demo just to see if it works.
Literally going to do that for as quick as possible then as soon as i see it running, turn it off.
:eek:
Ok. thanks for ALL of the help you've given me.
Just to clarify, i can put my card in, try it out, then put the old one back in till i get a new PSU can't i?
Only going to try it for 10 mins max
Yeah i'd be willing to buy off most places online that are recognised (i.e. overclockers etc etc)
However, i want to be ABSOLUTELY CERTAIN that the PSU will work, and will fit, before purchasing from a website.
Also, will this 4850 definately fit inside by unit?
My PC spec (im 99%...
Thanks for the help..
I'm tempted to put in the 4850 and give it a try, see what it's like, but not sure whether it would mess up my PC or not..
If the PSU broke i wouldnt be too bothered as i need a new one anyway, it would be a push to get a new one if anything haha
Yeah, think i'l...
Probably not, looks crooked :S
I'l fix that when im doin whatever im doin on it tomorrow, whether that be putting the graphics card in alone, or doing it along with the new PSU.
Just another Q, what would happen if i put the graphics card in now and tried to use it with the current PSU?
Ok opened it up, looked inside, took some pictures and closed it back up. Then realised the pics were that crap you couldnt read jack shit.
Im pretty sure it said somethin like 300w max or something but not sure :S
Also, heres a couple of pics inside:
Not entirely sure where...
ok gonna go do it now
Just a quick Q, do i need to constantly touch the PSU metal thing to avoid static damage? whats the best way?
also, is that maplins PSU compatible with dell, as in, will it fit?
:D
You'l have to bare with me as i've never done anythin like this before :rolleyes:
A couple of weeks ago i bought a "XFX ATI HD 4850 650M 512MB DDR3 DUAL DVI TV "xXx EDITION"" so i could play a few games on the PC.
Long behold, i'd bought a card that a couple of people told me was good, yet...