Search results

  1. K

    Newegg Deals 11/21

    Speak for yourself - still down here. It went down in the middle of a purchase for me, too :( edit: now up (23:38 PST).
  2. K

    there is something fishy about EVGA ACS3!

    I recently got the XFX XXX and the 97.92 drivers picked up the overclock automagically, so I'm thinking the "ban" is lifted.
  3. K

    Is my monitor gone? not connecting? need help.

    My CRT recently started doing that. I had to power mine off for a while and then power it on again. Also, I had to power it off before powering it on or bringing the monitor out of "sleep" mode. Also, check cables - power & video - on the monitor, too.
  4. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    IIRC, NEC is coming out with 22 and 26 (25.5) inch models soon.
  5. K

    System crashing... Video card problem?

    Looks like a hardware problem to me, but I suppose it could be a driver issue. Has anything changed on your system (drivers, BIOS, etc.)?
  6. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    I ordered mine on Friday as well. It arrived yesterday and it is a November manuf. date. Ah, well - that's what I expected. Maybe I got the last one....
  7. K

    Pc assembly faillure

    It should, but it doesn't always. My last build had bad ram and I didn't get any beeps.
  8. K

    Video going out

    Depending on your case and where the NB is on the mobo, you may be able to use a Zalman NB heatsink. It just depends on airflow. For example, in one of my P180 cases, I don't have fan installed in front. However, there's plenty of airflow coming off of the vidcard's flower heatsink/fan to...
  9. K

    have a wierd cable for an older (i think) monitor, few questions

    It's a VGA to BNC cable. I use one for my CRT. If you no longer have a monitor with BNC ports, you don't need it. You might be able to sell it on ebay. As far as converting it goes, if you're really good at wiring, using a break-out box, etc., then take a shot. Otherwise, I wouldn't bother.
  10. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    edit: sorry, double-post
  11. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    Unlikely. But, I'll be going on vacation for 2 weeks in a few months - I'll just send it in then. I would have waited if I could, but the monitor it's replacing is on it's last leg. This past Thursday it began having difficulty coming out of 'sleep' mode - it sounded like the thing had a...
  12. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    Thanks - I just ordered one for my FP241W that should be here on Wednesday (from Newegg - I ordered on Friday).
  13. K

    Why wont it run my native resolution?

    Most monitors do have inf files, though. If there is one available for your monitor you should use it. I have noticed that monitors generally work and look better when you install the inf.
  14. K

    Is my monitor dead?

    It's possible. Have you checked for a loose cable? Do you have another PC see if it will show something there? Does your video card have 2 ports on it so that you can try using the other one? Just some things to check.
  15. K

    dual monitors problem

    Boot into Safe Mode - it forces the resolution to 640x480 at Windows startup. If that doesn't work, it's not an issue with too little vram or the card not handling the resolution. Have you tried a different DVI cable? I was reading over in the Benq FP241W thread about how the Benq cable is...
  16. K

    8800 GTX Idles at ~95C

    Do a search for the error (missing hal.dll or whatever it is). One of 2 things happened - either your bootable partition changed and your boot.ini file was not updated to reflect that or you have some sort of corruption problem (bad windowsupdate, power failure while accessing the file (the OS...
  17. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    Does anyone know how the 24AWG monoprice cable compares to Cable Solutions cable? For a 2m 28AWG cable they want $73 USD whereas the 6ft 24AWG cable from monoprice is $11.48.
  18. K

    Dual monitor flashing Lines

    Just a shot in the dark. I will take the load off of the main gpu, however if the 2nd card doesn't have a hardware mpeg decoder, the cpu will take a hit.
  19. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    Problems (plural)? The only widespread problem I've seen discussed is the 1:1 pixel mapping. What else is there?
  20. K

    Difference

    viewable angle and inputs are different. Also, pretty much everyone says the 2007WFP is better. I imagine it has a different panel type that is better. I'm guessing the e207 has something like a TN panel whereas the 2007WFP has an IPS panel. Search around on these here forums and I bet...
  21. K

    8800 GTX Idles at ~95C

    I disagree - it sounds like the sensor is borked. If the HS had bad contact, the GPU would be VERY hot (as in the driver temp reading is correct).
  22. K

    Monitor Purchasing

    Sorry, I haven't been looking at 20" monitors, so I have no opinion.
  23. K

    Monitor Purchasing

    When the WZ and VW models hit the street (they are new and recently started being manufactured), they will have the 1:1 pixel mapping feature. The fixed W model is expected to hit the streets sometime around the end of January or the beginning of February. But, watch the FP241W thread as...
  24. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    This is a 24" monitor. Are you asking what is a good 20" monitor? If so, please either read one of the many threads on the subject (or start a new one if you have some candidates in mind).
  25. K

    dual monitors problem

    Have you tried the LCD by itself (i.e., only the DVI cable plugged into the card)? I wonder if it has an issue. It's possible with "only" 128MB of vram that your card can't handle the spanned resolution. Try a very low resolution (along the lines of 640x480 - whatever that works out to...
  26. K

    FP241WZ only availible online

    It will hit everyone who sells it eventually. IIRC, production started recently and it won't be "in stock" anywhere until the 2nd half of January.
  27. K

    No Video on External Monitors

    Ditto - with the default forum colors that is painful to read :(
  28. K

    8800 GTX Idles at ~95C

    I have the same setup except I have a 7800GTX. With all fans forced to 7v, my 7800 idles at 46-47C, peak of 60C. The 8800GTX is not 50C hotter. As long as the card's fan is working, I'd say RMA it. Oh, one thing to check is if the heatsink itself is getting hot. Also, what about the back...
  29. K

    About to buy a Dell 2407WFP...

    Only the "native" vertical resolution (1200) would be the same.
  30. K

    Problem with Video and GTA

    It sounds like either overheating or not enough power. Does it only happen in these 2 games? What are some other graphics-intense games you have where this doesn't happen? Can you do any kind of temp monitoring (even if it's MBM, speedfan, or nvtemplogger)?
  31. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    Are you in the US? costco.com doesn't list this monitor so I'm curious how you are getting it through them.
  32. K

    Do I need a new monitor? Tell me about my Dell

    Dell's monitors generally look better using DVI. Just make sure that the VGA cable is not plugged in when you test it. Generally speaking, that monitor should be fine. Take that with a grain of salt as I don't do any photo work on mine (I have one at work).
  33. K

    Error reading on screen?

    It almost sounds like the game is attempting to go to a resolution not supported by the monitor. Or, the game doesn't support the native resolution. I remember BF1942 had that problem - one had to go into an ini file and change a setting to get the game to load.
  34. K

    Dual monitor flashing Lines

    Without seeing it, it sounds like it's changing resolutions back and forth - game rez, movie rez, rinse, repeat.
  35. K

    Official BenQ FP241W Thread !!! Info, Pictures, Reviews

    Someone correct me if I'm wrong, but I'm fairly certain Newegg doesn't have any inventory. They work directly with distributors (like Ingram Micro). For a PC monitor, yes it's fugly. To me, though, it looks like it's trying to be a TV. As a TV it's not ugly at all.
  36. K

    Monitor Purchasing

    Read the feature lists on the Benq site. Basically, the WZ & VW have BFI (AMA-Z) and the W doesn't. Also, the VW is fugly.
  37. K

    Strange problem: Possible drivers issue?

    Wow, that's really odd. I'll definitely remember that one if it comes up again :D
  38. K

    Is there any difference between these two panels: BenQ FP241W vs. Acer AL2423Wdr

    Check the FP241W thread for the panel it uses. IIRC, AU Optics P-MVA, but check the thread. I don't know about the Acer. Have you tried searching? edit: corrected Benq panel type
  39. K

    Optimal Viewing distance

    Same here, except it was reading books - we're talking early 80s here :D I got LASIK done about a year and a half ago. So far it's been stable whereas prior to that pretty much every year's optometrist appt. resulted in me needing a new prescription.
  40. K

    Monitor won't show anything until windows loads up

    It could be that the device EID (I think that's what it's called) isn't being seen until Windows loads the monitor driver. This would mean it's an issue between the monitor and either the mobo or vid card BIOS.
Back
Top