Hmm... Off the top of my head...
An average Gigabte mATX board
A quad-core Q6600 w/ Zalman 7000Cu (methinks on the fan)
2x2gb, but I have another 2x2gb that I've been meaning to get a REAL mobo that actually has 4 slots
A fanless graphics card
A DVD burner
Couple hard drives
An SSD
Max budget...
First of all.. I want to share some things I've learned...
(1) Surge protectors do not protect your computer and other electronics from power outages. They're only designed for lightning strikes, for the most part.
(2) Surge protectors are not meant to be "daisy chained" to other surge...
Hah... yea, I wish I could've canceled the order.
Oh well, I'll have to RMA it and lose a couple bucks.
I actually ended up buying my buddy a refurbed HP (Athlon X2 2.4GHz, 4GB RAM, etc.) for $175 shipped!! And he'll prolly end up getting a 1-yr SquareTrade warranty to make it pretty much...
1. I would imagine it's not set in the bios if the Zotac Forum mods are saying 95w processors aren't a problem.
2. I guess the vga ram sinks are my last resort if it doesn't boot right away.
3. No stock heatsink/fan... hence this thread. But from the sounds of it, the cheapest heatsink...
I'm reading the OCZ forums right now to figure out how I can update my 1.4 Firmware to 1.5.
Basically, from what I understand, you can just burn a LiveCD, like Ubuntu.... and issue these commands in order to do a "sanitary erase", which will wipe all your data and get you back to 100% stock...
I'm trying a 1st gen Phenom 9750 in a Zotac GF8100-C-E mobo for a friend of mine.
I already ordered it, but later found out that the mobo has a 65W max TDP limit, while the Phenom proc is 95W! Some mods at the Zotac forums seem to think this processor and mobo should have no problem as long...
So from what I'm reading, they should be fine, even tho the mobo "recommends" 65W max TDP. Some mods at the Zotac forums say 95W proc will be fine, tho. And quad cores actually do tend to run a bit cooler from my experience.
If I had to focus on ONE fan, tho -- system or cpu -- which would...
Err... I really should've said they meant that a Phenom 1 board makes better sense than a Phenom2, perhaps? Not really important.
Now I'm reading that this board might possibly have a 65W TDP max limit. If that's the case, that would be the only thing stopping it, since the Phenom X4 is 95W...
Crap... should've checked for mobo incompatibilities first!!
I just bought this Phenom X4 9750 and Zotac GF8100-C-E (microATX, AM2+/AM2) mobo for $110 shipped from TigerDirect.... I don't think you can find a better quad core mobo deal, can you?? Or are these not even compatible?!?
Anybody...
I'm about to try this on my "oxidized" Gigabyte motherboard. Does anybody have any tips for me? I'm highly doubting this will work since it's not a solder/joint problem... but ya never know.
I think I might try 420 degrees for 5 min. Let's see how that works...
Cheapest one I see that accepts 8GB of RAM is some open box MSI for $49 + S/H.
But there's a new P5B-VM SE for $60 + S/H. Sooo.. I'll prolly go with that if the wire brush idea doesn't work. Wonder why I didn't see this board when I was looking for it a couple weeks ago.
No chemicals in the air besides the humid air itself.
The thing's been in a case as long as i've had it, with NO water cooler. Mobo was working great until I overclocked it for something like a week and then it just shut down one day, never to start again.
Nothing was ever spilled on it.
OH GAWD...
Gigabyte tells me that a chip on my mobo has been oxidized and it's not covered. OXIDATION?!?!? Almost every metal can oxidize... BUT IN A YEAR AND A HALF? ... on QUALITY components??
Isn't it their responsibility to use metals that won't oxidize? Clearly, the customer...
OH GAWD...
Gigabyte tells me that a chip has been oxidized and it's not covered. OXIDATION?!?!? Almost every metal can oxidize... BUT IN A YEAR AND A HALF? ... on QUALITY components??
Isn't it their responsibility to use metals that won't oxidize. Clearly, the customer service rep I...
I really would like to try an Nvidia board, but the "Linux gawds" tell me that Intel is still the way to go, even tho my experience with Linux + Intel graphics isn't the greatest.
BTW, that Gigabyte 9400 board on newegg is cheaper than the P5Q-EM you just suggested. ;)
DOH... I dunno why I didn't think about just looking around newegg.
I guess I'm gonna have to do the RMA thing if possible, otherwise, I'll get the EG41MF-S2H and pray that it'll handle 6 GB of RAM.
Just found the order in my order history from NewEgg... August 2007. So 3 months shy of 2 years.
Should I just email Gigabyte and see what they say? Should I only ask them how long the warranty is of the board at first? Do you guys think NewEgg just made a mistake?
Guess I just need to...
I looked up the board on newegg, and it says 1 year. Everywhere else says 3 years, tho. Soo... what should I do? I doubt I still have a receipt... I probly bought it from newegg, tho. Tried looking up a place on Gigabyte's site to contact them about RMAs and I failed.
Seems like that might...
I have 100 TABS open, not 100 windows. Not like it really makes a difference, but there is one. And I have them open to read, of course. I just open every page that I want to read... so that when I'm done closing one page, another one just pops up, already loaded. Keeps a constant flow of...
Soo... how is the EG41M-S2H different from the EG41MF-S2H?? Either one support 6GB?
I definitely need a shit ton of memory. I ran outta 2GB within the first couple hours of rebooting. Opening hundreds of tabs in Firefox does that to ya. I just bought 4 GB more for a total of 6 GB Crucial...
Oh yea... I might actually prefer NVidia chipsets/graphics. So, it's not Intel-specific.
That Zotac 9300-ITX was sounding really appealing with the NVidia graphics and built-in Wi-Fi. What kinda Micro-ATX cases are available with those specs?
My case I've had for a while, Ultra Microfly w/ 400W PSU for dirt cheap, like $40.
DANG, Danny... I didn't even notice the G41 board only had 2 slots. Thanks for pointing that out.
Soo... is there any decent Micro-ATX board that's still in production with 4 memory slots, supporting 8GB of...
Are there really no other options for micro-ATX cases? There were quite a few last year when I was looking, and now most of them are obsolete or at least not being sold.
Now the only thing I can find besides these Gigabyte boards is the Zotac 9300-ITX, which is a mini-ITX and has to drop the...
I burnt out my last Gigabyte mobo (GA-G33M-DS2R), and I'm looking at something cheap this time, and passing up the OCing bit for a minute. Is there any reason not to get the GA-G41M-ES2L over the GA-G31M-ES2L ?? I think I need the 8GB max memory provided by the G41 board, but ya never know...
I just think being able to safely shut down and restart your computer in ~30 seconds with a finely tuned OS would be pretty sweet.
I can honestly say I have noticed a speed increase in the autoclocking. Any special tips or guides for *real* overclocking, other than the stickies in the OC...
Awesome... I've gotta 3.37GHz processor.
But as I stated before, start up times in Ubuntu are exactly the same as my 2GHz C2D laptop due to hard drive limitations. It's still sad to me deep down inside. =-(
... but I just won $15 in a poker game, so I feel better! =-)
Look... this is what I bought, so I intend to keep it all for awhile, adding the extra SATA HDD & HD TV Tuner (hopefully I can return this if my cable co mostly sends out encrypted channels) will hurt my piggy bank ATM, but make it a tad over the edge. How many people have HD TV tuners in their...
Right... I'm the one in my own little world, but you can't provide a reference to someone who says SSDs doesn't drastically increase performance for everyday tasks.
I don't think this is really the best system... as i said, I shouldn't have skimped out on the graphics card, but my plan was to...
Right.... well, I'm not expecting them to become equal in terms of $/GB for at least a decade. But the fact is... there are real world benefits to using SSD as a system drive.
Ok, so there are limited writes on SSD, but I don't think it's as serious as a hard drive's head crash. The...
Well... 8500GT is pretty crappy card, honestly. It doesn't have Dual-DVI.
So, IMHO... faster (and cheaper, too) C2D w/ 8600GT or better would be the better build. Oh yea... and add SSD for system drive and RAID striping, too! ;)
I'm talking about SSDs being the greatest thing since sliced bread. As you mentioned, it gets you more durability, therefore more reliability. Flash has incredibly much faster seeks, that's why when your data becomes fragmented, SSDs show REAL WORLD improvement for anything you do... bootup...
Well... HTPC & my main rig. I figured between recording two shows at a time, managing the database of shows, running an X server, watching 1080p content, compiling apps, etc... Perhaps the extra 2 cores would be nice?? But as stated, the main limiting factor is the hard drive... occasionally...
Yea... I realize the mobo manual has directions for AC97, but as stated, the wires/pins aren't exactly labeled the same.
CPU Temps avg about 30.5 C at night, and usually seem to be 34.5 during the hotter hours of the day.
It's truly a shame that I paid $100 more for this CPU than I should...