• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

For those with large and heavy GPUs, do you use an anti-sag bracket?

For those with large and heavy GPUs, do you use an anti-sag bracket?

  • Total voters
    34
Quiz

Quiz

[H]ard|Gawd
2FA
Joined
Aug 25, 2010
Messages
1,099
For those with large and heavy GPUs, do you use an anti-sag bracket?

I have an XFX Mercury Radeon RX 9070 XT OC that is 360 mm in length and heavy. It came with an anti-sag bracket. I have not installed it but wondering if I should.
 
Just installed mine.

By the way, how much "lift" should you apply to the GPU? Just enough to support the GPU or a little more?
 
No because my 5090 has a wb on it and I made the tube going to the top rad the right length so it pulls the card up ever so slightly
 
My case already comes with one so might as well use it.

Quiz said:
Just installed mine.

By the way, how much "lift" should you apply to the GPU? Just enough to support the GPU or a little more?
Click to expand...

For me just enough to support it from sagging, maybe a just a tiny bit more. Sometimes the motherboard pcie slots don't align perfectly perpendicular with the pcie card mounting in the case so forcing the card to be visually level actually ends up flexing card pcb in the slot upwards.
 
Last edited:
I wouldn't call it a bracket, but I'm using the little prop/screwdriver thing that came with my ROG Astral 5090. My case (Fractal North) has a mesh panel right below the vid card, so it's kinda wedged in there and doesn't really move. Why in the hell Asus didn't include a proper bracket with a ROG Astral I don't understand. Probably should have ordered a bracket, but it didn't occur to me that a goddamned ROG Astral wouldn't include one after the much cheaper Gigabyte Gaming 5090 I had briefly (died after 20 minutes, got returned to the retailer) came with one. Then I get the card, put everything together, wedge the screwdriver in there and, hey, it's really stuck pretty good so I think it's fine.
 
ive only seen gpus come with kick stands, like you got, never seen one with a bracket

assuming you mean these:
1788217963404.png
 
pendragon1 said:
ive only seen gpus come with kick stands, like you got, never seen one with a bracket

assuming you mean these:
View attachment 823141
Click to expand...
Gigabyte one was a bit nicer than that. It screwed onto the GPU and had a plastic foot. I'm not sure what the difference is between a bracket and a kickstand, I just know my Asus was kinda lame in that department. It works for me, but that's because of my case not because Asus did a good job.
 
kickstands/braces just go under the card, brackets attach to the case via the pcie slots. both achieve the same goal.
1788219679168.png

1788219729584.png


or get creative, im litterally using a piece of a gpu box(black cardboard)...
1788219881253.png

1788219915261.png

1788220066072.png
 

Attachments

  • f09f2a56-da73-4357-95a0-f2071794d268~1.jpg
    f09f2a56-da73-4357-95a0-f2071794d268~1.jpg
    490.9 KB · Views: 0
As an Amazon Associate, HardForum may earn from qualifying purchases.
New cards are way too heavy to not have one at this point. Wasn't much of an issue years ago when cards were comparatively small, but I would consider it a requirement now.
 
You must log in or register to reply here.
Back
Top