Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
How does that relate to the G5?DaMiEn said:After some looking around, here's the guide you're after http://www.razerblueprints.net/index.php?option=com_content&task=view&id=110&Itemid=
jaguax said:^ Wireless mice are not the best for gaming. Not just because of the latency issues(which I understand they have pretty much eliminated, but the "placebo" effect is still there for those paranoid people like me), but because of the hefty weight.
I'd say the G5 is the best for gaming, since it is corded and has no weight to it.
Wireless mice are fine. If the weight is too much.. maybe you need to get a better surface for the mouse. My MX1000 glides easily across the desk.jaguax said:^ Wireless mice are not the best for gaming. Not just because of the latency issues(which I understand they have pretty much eliminated, but the "placebo" effect is still there for those paranoid people like me), but because of the hefty weight.
I'd say the G5 is the best for gaming, since it is corded and has no weight to it.
ChingChang said:Wireless mice are fine. If the weight is too much.. maybe you need to get a better surface for the mouse. My MX1000 glides easily across the desk.
One thing I really hate about wired mice is the resistance from the wire. It's kind of hard to expain, but when I move the mouse the wire will sort of push it a little.
I think you need to try using a quality wireless mouse sometime.Stellar said:Wireless mice will never be as accurate as wired mice, and are subject to battery, interference, and latency issues.
As far as the wire issue, simple solution is to put a loop in the wire just ahead of the mouse by a few inches. This removes all of the tension. A better solution is a wire dongle or a keyboard tray with a wire clip.
ChingChang said:I think you need to try using a quality wireless mouse sometime.
The loop will still probably cause a little resistance. Even if it doesn't, why should I get a wired mouse where I have to create a loop to remove resistance, when I could get a wireless mouse and not be restricted at all?
The only issue with wireless (logitech) is interference, but if it is setup correctly there should be no problems. MX700 would freak out once in awhile if the reciever was placed too close to my old CRT. MX1000 I have noticed 0 problems with interference.
Battery life? I can go a full week of heavy usage without charging it, and once the indicator goes to 1/3 and turns red, I can just put the mouse in the charger overnight and it will be full the next day. The MX1000 apparently never needs replacement batteries either. If for some reason it did, I'm sure logitech would send a new mouse to replace the dead one, as they usually do for any mouse related problems.
MX700 had good battery life as well. I used it for around 3 years and didn't need to replace the batteries until they finally started dying out. I think replacement batteries were like $12 for 4 or something.
ChingChang said:if you're that concerned about battery life, you can always put the mouse in the charger inbetween rounds.