Recent content by zoobaka

  1. Z

    The [H] RTX 3080 owners thread.

    my ftw3 oc to 2100 @ 1v but i have to set it to 2150 , no matter what i set it drops about 40 mhz. then settles at that number solid. If i want 2000 i set 2040, it locks at 2010..mhz
  2. Z

    Gigabyte RTX 3060 Ti EAGLE 8G initial thoughts and question

    Those noctua's spitting hot air from you aio into the case? Well i took mine apart and re applied the paste. took like 1 or 2c off the temps. i found the thermal tape was barely touching one vrm. i fixed it. one little tiny black squares on the end of the line of vrms. have a good oc and max...
  3. Z

    Gigabyte RTX 3060 Ti EAGLE 8G initial thoughts and question

    my 3070 zotac mini oc @ 1950ish boost never goes above 75. thats at 100% fan and it has only 2 fans and a smaller heat sink.. oh but i leave the side off the case. hella funny, ill be selling this one since i got a ftw ultra 3080 in a week,
  4. Z

    Gigabyte RTX 3060 Ti EAGLE 8G initial thoughts and question

    I flashed my zotac twinegde 3070 oc with asus tuf oc bios here with a asus bios and it bosts to 1965 at stock and settles 1935 lowest ive seen 1910. if it gets like up to 75c it doesnt really go up and down since the it has the limits relaxed to 365 wats. i would set a fan curve on it , with...
  5. Z

    I5 9600k @ 5.0 Ghz, is this ok as voltage?

    yep , avx2 also had a stick of bad ram that would error under occt after 15 min. once i ghot new ram i can go hours avx at 5gh at tht volt.
  6. Z

    I5 9600k @ 5.0 Ghz, is this ok as voltage?

    mine needs this to be 5ghz avx stable. 3or 4 hours occt stable
  7. Z

    What do you use to test stability?

    OCCT large avx2, linpack 3 hours each stable
  8. Z

    My Kryonaut results (not good)

    I had the same problem . like 8-10c higher temp then the cheap stuff i had. I sent it back and got the cooler master nano stuff. about 10c lower temp..
  9. Z

    The Delidding for Cheapskates Thread

    of course i didnt take pics since ive been delidding with razors since 3570k
  10. Z

    The Delidding for Cheapskates Thread

    I just ..................my 8086k.. less than 5 min.. easy as pie, 7600k,7700k,8600k,8700k, and now the 8086k no fatalities.. if you have a brain..
  11. Z

    Kryonaut grizzly paste 10c + higher whats wrong?? bait and switch ?

    well i tried again using d-15s and 82c was highest in prime 95. i just put sinth thermal elixer 2 from frys on [again] and guess what 68c so either fake or bad batch
  12. Z

    Kryonaut grizzly paste 10c + higher whats wrong?? bait and switch ?

    I got my money....chaching.. I never use amazon so the process was a bugger.
Top