• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by zog

  1. Z

    How Much Tygon For Stacker?

    From MY experience and research: BIP: (about 1" thick, high fin density) works well with low CFM fans and will benefit from high CFM fans BIX: (about 1.75" thick, high fin density) works slightly worse (maybe 1-2°C) than BIP with low CFM fans but will perform better with high CFM fans...
  2. Z

    How Much Tygon For Stacker?

    I have a double heatercore mounted in my Stacker between the drive rails in the front of the case. It takes up the lower seven(7) drive slots. I made a sheet metal shroud to mount the fans with (Not the prettiest thing but it serves it purpose). I used 2" wide velcro strips to mount the...
  3. Z

    How Much Tygon For Stacker?

    Its not so much modding the heatercore to fit. It more lies in modding the inlet/outlet pipes in order to fit your tubing. A 2-302 has a inlet pipe dimension of .75" and an outlet pipe dimension of .625". Some people just cut the original fittings off and stretch the tubing over it. Others...
  4. Z

    How Much Tygon For Stacker?

    I have an original Stacker. Running with a pump, 2 blocks, res, and double heater core I ended using a little over 3ft of Tygon. It will vary with what/where you are installing and how you do your tube runs. When you say a "DD radiator" are you talking about the double heater core they...
  5. Z

    FS: Enermmax 550w/ OCZ DDR Booster/ H2o Cooling Rads, tubing, fans, mounts, fittings

    Excellent service and product. Heatercore arrived exactly as I requested. Paint and mod job was very well done. Pressure tested fine (6 hrs @ 50 psig) without any leaks. Zog
See more
Back
Top