• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by xoai

  1. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    There's no way you could possibly route all the power cables out of the PSU and around the motherboard. The space there is very limited as-is, not to mention you'd have to use the case without the covers due to the power cable sticking out the side. As others have noted, you'd just be blowing...
  2. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    I actually have a regular SATA for the SSD tray right now. It works perfectly fine and even has some extra space depending on how your orient it. In fact.. Yesterday, I removed my H60 and put in an extra 3TB HDD suspended vertically from the power supply by a few strips of Scotch Heavy-Duty...
  3. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    The tubes are very thick and not flexible, but still fits well if you don't have the drive cages in
  4. X

    ASUS GTX 670 DirectCU Mini

    This would make most ITX cases look like they have tons of wasted space
  5. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    These all fit without any modifications right?
  6. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    Has anyone noticed the new customization option for the Maingear Potenza that includes a GTX Titan? Curious to see how they manage to fit the 10.5" card in there..
  7. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    I've heard other people do this also! But when I tried it.. The space inside doesn't allow for those large asus rings to fit?
  8. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    Thanks, I have the stock cooler on there now and it's running about 75c at 100%.
  9. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    Well.. I removed the pump to find that the thermal paste had managed to slide down somehow and basically only cover half the CPU. Went to best buy and fry's to get new stuff, but they only had a small selection of off-brand ones. Ended up ordering arctic silver 5 from newegg. I'm somewhat...
  10. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    Yeah, I'm using the new H60 and there isn't any noise coming from it. Both the AP141 and the H60 are plugged into the CPU fan connectors. Is there a seperate Chassis header? I'm downloading Fan Xpert now, but Speedfan reads the AP141 at 1400-1500 RPM and the H60 at 4500-4600 RPM edit: Ah, yes...
  11. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    42c under load?! This is my first experience with watercooling.. Honestly you could be right and the cooling isn't functioning (especially since I hear no noise coming from it at all?). I just ran Prime95 and watched it rise to 90c in about 6 seconds before I quickly closed it down. The last...
  12. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    Is 700-800 rpm on the LEPA is enough to keep it cool at 100% CPU? The AP141 at 1500 rpm already makes my CPU hit about 80c
  13. X

    Silverstone SST-FT03-Mini (Mini-Itx)

    The cables are crushed a bit by the video card, but I was able to get the front panel audio working. It's definitely possible though, just push the video card in enough for it to lock and put the screws in place and you're good to go. I have the bronze psu and my cables are very well managed...
  14. X

    SSF Case - Is Weight An Issue?

    Obviously, in the same $150-200 range, I'd go for high-quality and luxury/high-end over the poor/mediocre quality or low-end choices. Might as well be throwing your money away if you opt for anything else.
  15. X

    Silverstone FT03 MAYX / Mini and New Corsair H90

    Both FT03's only have mounting for 120mm water cooling
See more
Back
Top