Recent content by Wolken007

I am having all sorts of problems with my 4870x2 in Crysis. Microstuttering all over the place, in both dx9 and dx10. Installing some more games right not to test further, but I can't seem to do anything to get Crysis to run like it should. I am running on 850w Thermaltake PSU. Powered dual...

I am having the microstutter glitch with Crysis. Such a pain in the ass. I bought this card today thinking it would really give me a boost in fps -- which it did -- but also brought along microstutter. Anybody know of any fixes?

Those ram modules shouldn't be holding you back from overclocking to 3ghz. I only had problems with my q9450 and all 4 ram slots filled with I was going for 3.4ghz+.

Are you going to be doing any overclocking with the new chip? Only reason I ask is that I have the same motherboard as you and have run both a Q6600 and Q9450 on it. The DS3L overclocked the 65nm chip much better than the 45nm chip. I moved my Q9450 to a P5Q-E and was able to push much more...

I have the motherboard and it runs 4x1gb modules just fine. I even have a moderate overclock on my q6600. The only difference is overclocking headroom. As soon as i start pushing the fsb beyond 334mhz, i have to increase voltages to the mch more with the 4x1 modules.

that biostar board looks like a monster, i am quite tempted to order one myself. I seem to be stuck on my Gigabyte EP35C-DS3R at 3.2ghz with my Q9450. What voltages are you running on to get to 3.6ghz?

I can up it to +0.2v (1.45v) and boot stable at 433x8. Just not sure if that is too much voltage to the nb. It is so bizzare, I am rock solid at 3.2ghz (400x8) at all default voltages. As soon as I bump it up over 400, I all of a sudden need to start adding FSB voltage and NB voltage like crazy.

I have a Gigabyte GA-EP35C-DS3R.

I am able to hit 3.4ghz 425x8 stable, but needed too much voltage to Chipset and CPU, so I backed it down to 400x8 everything at stock voltage. I have to think it is the 8gb memory that is holding me back. To get anything above 400mhz fsb, I need to start jacking up voltages. Perhaps I'll...

I hear people complaining of a buzzing noise coming from their monitors. Let me just tell you that I bought a Westy LVM 37w1 tv about two years ago and the thing is a piece of junk. The television crapped out after only a year and 3 months (3mos out of warranty). The inputs stopped responding...

I don't mean to bring back such an old thread here, but did any of you ever have any luck with getting this to work with the firmware upgrade and DVI port with nvidia cards? I have a 7800GTX and have sent the monitor in for a firmware upgrade. I should get it back sometime next week, and I am...