• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Warget

  1. W

    SFF Upgrading, help needed...

    I didnt choose the Qmicra, I went for the Nzxt Rogue, as you've told me, and some review sites, the Rogue is a bit "bulky" but on the other hand it will be better cooling options. I went for ASUS P5E-VM HDMI, C2D E8400, NOCTUA NH-U9B, (PSU)NESTEQ NA4501, Corsair CM2X2048-8500C5D 2*2048.
  2. W

    SFF Upgrading, help needed...

    typical, the Qmicra is impossible to buy in sweden :( You dont have another suggestion or some webshop that ships abroad? edit: I was looking at the shipment cost from the (PcdLabs)U.S to sweden, and the total cost would be about 2000 swedish kr. Maybe its not so bad, what is the differens...
  3. W

    SFF Upgrading, help needed...

    Ok! I think I understand what you both mean :( Rogue W:368mm H:278.2mm D:421.2mm SUGO W:263mm H:216 mm D:393mm You are right, the Rogue is to big. Is there any other case that can fill similar needs as the rogue ? Im up for suggestions, especially with features as; room for a good CPU...
  4. W

    SFF Upgrading, help needed...

    Hello [H]ardForum! :cool: Im about to do some upgrading on my current system. I would really apreciate some help. Old System: CPU: E4300 RAM: Corsair 2*1Gb 6400 DDR2 Mobo:Gigabyte G33M-DS2R SFF Case: Sugo01 The parts I was thinking of upgrading are ; CPU: E8400, RAM: 4Gb 8500 DDR2, and the SFF...
  5. W

    GA-G33M-DS2R

    Ok! Thanx man! Well which 1333 c2d should I go for ? I was thinking the E6550 or E6750, does it even matter ? Anyways, I doesnt have the cash this month, I had to buy winterwheels for my car and it wasnt cheap! :eek:
  6. W

    GA-G33M-DS2R

    Im not sure what chip my xms2 uses, but, I was able to boot with 333 FSB, I used your settings. It worked! But I havent applied pressure on the system yet, but soon! :D On the topic of switching cpu, you recommend c2d fsb1333 for what more reasons than this board, could a c2d fsb1066 (with the...
  7. W

    GA-G33M-DS2R

    Well I have 2 Corsair XMS2 sticks, will the do ? I have to buy another cpu then, the company already shipped the mobo :(
  8. W

    GA-G33M-DS2R

    So the fact is that the E4300 C2D is no use on this board, due to the busspeed ? I was using the Abit Fatal1ty F-I90HD until it crashed with an E4300 cpu. And the company agreed to send me this gigabyte board instead as a replacement, but was that a mistake ??? :confused: Maybe I should have...
  9. W

    Gaming mATX board FINALLY!

    What voltsettings etc do you use ? thx for the tip about a new version of speedfan, works great! :D sleepeeg3 you never answered ? :(
  10. W

    Gaming mATX board FINALLY!

    F-I90HD and Zalman CNPS7000-cu :rolleyes:
  11. W

    Gaming mATX board FINALLY!

    I found my rig most stable with these settings; *CPU:RAM-By SPD *Vcore: 1,45 *VDDR: 2.00 *VNB: 2.016 I cant get past 355 FSB, to achive higher FSB, do I have to change/update bios, or something else ? When I tried to switch between E6400 and E4300, I found that the E4300 was cooler only at...
  12. W

    Gaming mATX board FINALLY!

    Here is som imgz of my rig :D
  13. W

    Gaming mATX board FINALLY!

    no probs with Zalman CNPS7000B-Cu ;)
  14. W

    Gaming mATX board FINALLY!

    Running with SATA as we speak, no probs! :D
  15. W

    Gaming mATX board FINALLY!

    Yes got my sweet chili red mobo today !!! :D Im running E4300 @ 350 FSB Vcore 1.4 :) at the moment im going to install os, before trying to o.c it more!
See more
Back
Top