Recent content by tylerdurden83

i managed to keep the more relaxed timings (3-3...) that default for a ddr400 setting even when switching to the ddr333 setting (that defaults at 2.5-...) so this way the ram never gets past the 200 mhz and keeps the relaxed timings, which means that everything is below the ddr400 default...

nothing, got stuck at 2.5 :(((

i just bought 2x zalman 9700 nt, first time i put them, hope i dont mess and burn the cpus! any suggestion/thing i need to know before i go into it? i also still need help with the ram issue thanks to everyone that will reply

anyone can help me about the ram issue?

Updates: - i had no problem setting the bus at 800 (as i could have imagined) - i had problems setting the timers, if i unchecked auto and manually set them, cpu-z would keep showing a ratio of CPU/11 even if i lowered them from ddr400 to ddr333. - i simply failed in overvolting...

Thanks for the help, going to give it a go!

The freeze happened with an overvolt from 1.35 to 1.4 already active....

bump...

Do i have to raise the vcore after i raise the fsb? this is what someone suggested me but it makes no sense to me tbh...

I have to oc a pair of opterons on a tyan mobo. Even if they have different names i have been able to identify all these stuff. Especially, i have set the htt at 600 (3x), memory at CPU/14 or CPU/17 instead of CPU/11 as it is at default. This way i do not exceed the 1000 for the htt or the...

100 views and just one reply :(:(

I put the HT in the bios at 600 instead of auto, isn't that it?

New data RAM FSB:DRAM= CPU/14 Frequency=171 CPU Core speed=2.405 GHz Multiplier=11 HTT=218.73 If i try to go a bit ahead it wont end the cinebench...

Hello everyone. I'm going to try my very first overclock, and i hope that you can give me some help with it. My configuration is the following, and surely doesn't make overclocking particularly easy. CPU: 2xopteron275 MOBO: Tyan Thunder K8WE s2895 Ram: 4xKingston 1GB DDR400 ECC Registered...